The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.

In the short period that this particular table saw has been on the market, it is clear that it is not your average power tool. The sales have been good, which is no surprise as the DCS7485T1 is a beautifully compact and cordless table saw. It makes use of balanced power and portability. At only 48 pounds in weight and a no-load speed of 5800 rpm, you can blast plywood among other timber sizes with ease.

Balancing heavy-duty durability and lightweight design, this machine proves that good things can come in small packages. While buyers are overall happy with their purchases, they do seem to all agree on one thing: the DEWALT DWE7480 may be an overall investment, but it could seriously do with a miter gauge replacement. Buyers report replacing its inaccurate, plastic gauge for a solid, more detailed one.
Additional information for residents of Quebec only: The regular annual rate for persons applying for the Triangle Mastercard and the Triangle World Elite Mastercard is 22.99% for cash transactions and related fees and 19.99% for all other charges. Some applicants may receive a higher or lower regular annual rate depending on a credit evaluation. The minimum payment is the sum of (a) the greater of: (i) interest and fees shown on your statement + $10; or (ii) 5% of the New Balance, excluding amounts on special payment plans, (b) any balance over your credit limit, (c) any amounts past due not included in (b) above, and (d) the amount of any equal payments plan instalments then due. Balances under $10 are due in full. For residents of Quebec, the period between the statement date and the due date for payment is 26 days. The billing period covered by each statement can be from 28-33 days. The Triangle Mastercard and the Triangle World Elite Mastercard do not have an annual fee. Examples of borrowing costs (rounded to the nearest cent) assuming that all charges are purchases bearing interest at the regular annual rate of 19.99%, a 30 day month, no charges made on special payment plans and no other fees, additional payments or other changes are:
∆∆The Triangle Rewards Program is owned and operated by Canadian Tire Corporation, Limited. Triangle™ Mastercard®, Triangle™ World Mastercard® and Triangle™ World Elite Mastercard® are issued by Canadian Tire Bank. Rewards are in the form of electronic Canadian Tire Money® (CT Money®). To collect bonus CT Money you must present a Triangle Rewards card/key fob, or use any approved Cardless method, at time of purchase or pay with a Triangle credit card. You cannot collect paper Canadian Tire Money on bonus offers. Any bonus multiplier is based on the base rate of collecting CT Money (0.4%), and will be added to whatever the Member would otherwise collect, without the bonus. Example: On a $100 (pre-tax) purchase with a 30X bonus multiplier a Member would earn a bonus $12 in CT Money (30 X .4% X $100). The 40X for Triangle Mastercard, World Mastercard and World Elite Mastercard customers consists of the 10X everyday plus a 30X bonus. Not all items sold are eligible to earn CT Money or to be redeemed for. Conditions apply. Visit triangle.com for full program rules and Partner location information. The offered rate is exclusive of any bonus or promotional offers or redemption transactions. CT Money is collected on the pre-tax amount of the purchase. Bonus CT Money collected from online orders will be applied to the Member’s Triangle Rewards Account within five weeks of the purchase date. No rainchecks.

extension dwe7491rs


The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.
The TruePower 01-0819 may look like a miniature version of a table saw — and that’s because it is! Ideal for hobbyist modelers and DIYers looking to tackle minor jobs, the 01-0819, while lacking the same power and performance as its larger, pricier counterparts, is a steal at under $50. A must for any toymaker’s workbench, this bite-sized machine measures in at 8.5 x 7 x 7 inches, and while it lacks important parts like a guide fence, it gets basic 1/2-inch wood or foam board cutting jobs done, slicing through softer materials with ease.

dust removal dewalt dwe7491rs


There are two types of motors used in table saws: universal motors and induction motors. With a universal motor, the power source is linked directly to the blade, providing a whole lot of power. The downside is that these models are generally quite loud. Induction motors, on the other hand, are connected to a belt that then transfers power to the blade. As a result, you get quieter operation and the ability to cut dense materials. The downside is that these models require more preventive maintenance, as you have to adjust the belt’s tension periodically.  

dwe7491rs draw game


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.
Blade size decides how deep can the wood log be cut and in different positions how well the product can protrude through the wood logs. Sometimes it does lead to confusion like is 10 inch better or 8 ¼ inch better, the answer is 10 inch is most suitable for professionals for work sites which involves heavy wood work and 8 ¼ inch would be preferable by home owners and DIYer’s. Hope this would be of help for the consumers to decide which Dewalt model would be suitable for them based on blade size.

tab counter storage dwe7491rs


Our review of DeWalt table saws focused on two models that are very, very similar and one that harkens great advancements in the tool line that sadly has yet to fully come to fruition. The DWE7491RS and DW745 are very similar. The 7491 is slightly more powerful but also slightly heavier and both have miter gauges that should be replaced when purchasing the saws themselves. But the differences are slight enough that our choice of top pick comes down to the 7491’s larger rip capacity. That’s something that won’t affect a lot of people very often, so if your dollars are tight, you can go with a better for-dollar value with the DW745.
There are two types of motors used in table saws: universal motors and induction motors. With a universal motor, the power source is linked directly to the blade, providing a whole lot of power. The downside is that these models are generally quite loud. Induction motors, on the other hand, are connected to a belt that then transfers power to the blade. As a result, you get quieter operation and the ability to cut dense materials. The downside is that these models require more preventive maintenance, as you have to adjust the belt’s tension periodically. 
RPM plays a major role in deciding the amount of revolutions the blade can perform in a minute with 745 performing 3850 rpm. This is really good that the blade can roll 3850 times per minute and get the work done easily. The durability of the table is for a 3 year time period which is good considering the usage of the product. Indeed a good table saw by Dewalt.
In layman’s terms, a miter gauge is a device that allows users to set up the angle of the material being cut with a table saw. And while most table saws come with built-in miter gauges, others, well, don’t—which is why the Kreg KMS7102 Table Saw Precision Miter Gauge System is invaluable. Whether you’re replacing an old, worn-out gauge or putting it to use in conjunction with a table saw that didn’t come with its own proprietary gauge, the KMS7102 is specially designed with precision in mind. After all, accuracy is vital to successful woodwork.

difference between dwe7491rs and dwe7499gd


It accommodates a clean workspace with its dust port that you can link to the external accessories to keep that messy dust away. The face is great, easy to set up, and in its category, it is the best fence. You can adjust it with accuracy and quickly use the pinion fence rail and the rack. The only complaint is perhaps the miter gauge, otherwise, DeWalt DW745 is the best table saw you could ever have.

dewalt dwe7491rs


The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less robust stand, and after viewing it in a big box store, I was glad to have this one.

DEWALT table saw holder, mobile / rolling (DW7440RS)

×