None of your woodworking projects will go wrong if you have the best table saw for your individual needs. Hopefully, with the above table saw reviews, you now have enough info to find your right fit. Although a comparison between the DWE7480 vs DW745 shows almost the same great features, our top pick is the DW745. Although it is small for some people, it is durable, has good speeds, is powerful, and most importantly, it is budget-friendly.

This table saw kit includes everything you need to get started with a 20-Volt MAX compact half-inch drill driver, two 20-Volt MAX lithium-ion 1.3 Ah battery packs, 20-Volt MAX charger and a carrying bag for the drill. You'll get a 15-Amp, 4800 RPM motor that has a 32.5-inch rip capacity to handle 4-by-8 plywood or OSB sheets. The table has on-board storage to give you a place to keep your guard, fence, wrenches and miter gauge when you aren't using them.

dwe7491rs what's in the box


Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

The same goes for the kind of work you expect to do. Although a table saw is a pretty serious investment, you can trim money off your purchase if you don’t need something that will go through ash like a katana through a zombie. If you need the power or anticipate needing it in the future, you’ll want to invest extra to get it. So, be honest about what you’re going to need and tailor your major purchase to meet those needs.
Higher-End Models: The higher-end table saws ranged in price but were somewher between $ 500 - $800. These had a built-in "stand system", the largest table dimensions and the largest ripping capacities (both to the left and right side of the blade). The features were similar to the lower priced models though, so you are not paying for features, from what I've noticed.
Dewalt DCS7485T1 is one of the table saws which the users prefer. The model is well recognised in the market with 8 ¼ inch blade size. The blade can cut it to a size of 2 ½ inch when placed at 90 degrees and 1 ¾ inch when placed at 45 degrees. The cut size matters to most professionals as with deep cuts lots of effort is put in which can lead to fatigue.

dewalt dwe7491rs lowes


Our review of DeWalt table saws focused on two models that are very, very similar and one that harkens great advancements in the tool line that sadly has yet to fully come to fruition. The DWE7491RS and DW745 are very similar. The 7491 is slightly more powerful but also slightly heavier and both have miter gauges that should be replaced when purchasing the saws themselves. But the differences are slight enough that our choice of top pick comes down to the 7491’s larger rip capacity. That’s something that won’t affect a lot of people very often, so if your dollars are tight, you can go with a better for-dollar value with the DW745.
"The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less-robust stand, and after viewing it in a big box store, I was glad to have this one."—Justin Park, Product Tester

dwe7491rs for carpentry


You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.

dwe7491rs driving the extraction knife


You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.

dwe7491rs driving the extraction knife


With a 32½-inch rip capacity and motor capable of up to 4800 rpm, the DWE7491RS is more than prepared to effectively deliver 3⅛-inch deep cuts to thick slabs of wood. Happy customers sing this machine’s praises, reporting that it’s as sturdy as a table saw can get — plus, it’s easy to use, and assembling it is a cinch. They do however note that workers looking to produce finer cuts should seek out a replacement blade since the one provided is more suited for fast, rough work.

dust bag dwe7491rs


This table saw was completely redesigned and heavily improved in both safety measures and cutting capacity. For safety, DeWalt redesigned the red power switch to be electronic. It automatically resets the saw to turn off if the power is interrupted whatever the cause. I’ve heard some job-site horror stories regarding table saws who weren’t turned off properly so this redesign was very much needed.
Blades come in various types and sizes. There are rip blades for cutting along the wood grains, hollow ground blades ideal for various materials, crosscut blades suitable for smooth and precise cuts, and combination blades for that double up as blades for crosscutting and ripping. Depending on what you do the most, it’s necessary to choose the right blade type and size that will get the job done with the most ease.

Upon unboxing, I wasn’t sure how much I cared that the built-in stand for this saw had wheels, but, boy, did I ever use them. If weather rolled in, the saw folded up and rolled to shelter in the garage. This was extremely convenient since I did my cutting in the driveway and stored the saw in the garage overnight. This maneuverability might be less useful to you if you plan to use the saw primarily in your garage where you could build or buy a semi-permanent stand rather than use the fold-up stand of this model. There is also on-board storage for the power cord and the loose parts such as the miter gauge and guards, making it completely self-contained.
I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.
Stephanie Faris is a novelist and business writer whose work has appeared on numerous blogs. She worked for the State of Tennessee for 19 years, the latter six of which were spent as a supervisor. She has written content for entrepreneurs and marketing firms since 2011. In addition to her online content, she is also the author of eight novels for Simon & Schuster, including the Piper Morgan chapter book series.

DEWALT DWE7480 10 inch Compact site table saw with Site-Pro modular protection system

×