Dewalt DCS7485T1 is one of the table saws which the users prefer. The model is well recognised in the market with 8 ¼ inch blade size. The blade can cut it to a size of 2 ½ inch when placed at 90 degrees and 1 ¾ inch when placed at 45 degrees. The cut size matters to most professionals as with deep cuts lots of effort is put in which can lead to fatigue.

dwe7491rs given the blade


RPM plays a major role in deciding the amount of revolutions the blade can perform in a minute with 745 performing 3850 rpm. This is really good that the blade can roll 3850 times per minute and get the work done easily. The durability of the table is for a 3 year time period which is good considering the usage of the product. Indeed a good table saw by Dewalt.

power dewalt dwe7491rs


We fell in love with the idea of the DCS7485B. It’s battery-powered, lightweight, quiet, and super portable. That means taking it to a job site won’t in itself be a workout. But the battery just doesn’t deliver quite yet, so while we’re keeping our eyes open for new innovations in the technology, right this minute we suggest that if you have any serious work to do that you look to a more robust model.

With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt glasses dwe7491rs


If you’re looking for a machine with high capacity, the SKIL 3410-02 has a 3.5-inch cut height with the ability to cut through four times the material on each pass. The consensus among reviewers is that, for such a low price, you end up compromising on miter gauge and saw blade quality. Luckily both of those things can be replaced if you so choose.  

dwe7491rs notice


Higher-End Models: The higher-end table saws ranged in price but were somewher between $ 500 - $800. These had a built-in "stand system", the largest table dimensions and the largest ripping capacities (both to the left and right side of the blade). The features were similar to the lower priced models though, so you are not paying for features, from what I've noticed.

There are a couple of other options, as well. There are hybrid table saws, which fall solidly between a cabinet saw and a job site saw. For crafters, it might be worth it to look into a mini saw, which measures only a few inches and has moving parts. These saws are mostly used for model building, but they can also be put to use in woodworking projects.

dewalt dwe7491rs home depot


If you choose a portable table saw, cut a hole in a three-quarter-inch piece of plywood and attach it to the table. This one extra move will let you attach your table saw to sawhorses for extra stability. It also lifts the table saw to a level that’s more comfortable. The hole provides extra cooling for your equipment while also allowing sawdust to drop through.

dinner dewalt dwe7491rs


About the setbacks, only a few users have cited that the dado blade is hardly accommodated perfectly and that it features a flat-track gauge instead of a T-track, which might not keep the miter gauge appropriately in place. Other than that, this table saw is popular and it enjoys good reviews. So, if you value efficiency and meticulous works, this is the saw you should get.
The shark fin-style riving knife behind the blade keeps cut pieces from binding and causing kickback. The included push stick is useful when using thinner workpieces that don’t allow your hand to be at least 4 inches from the blade. The power button’s flip cover ensures that you only turn the blade on when you mean to, which is a welcome layer of safety. 
You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.

dwe7491rs dust collector


None of your woodworking projects will go wrong if you have the best table saw for your individual needs. Hopefully, with the above table saw reviews, you now have enough info to find your right fit. Although a comparison between the DWE7480 vs DW745 shows almost the same great features, our top pick is the DW745. Although it is small for some people, it is durable, has good speeds, is powerful, and most importantly, it is budget-friendly.

The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.

given for dwe7491rs


If you’re working out of your garage, you may not have room for a full-size, standalone table saw. There are several tabletop models available that provide a smaller (and typically less expensive) alternative with the same wood-cutting capabilities. However, if you do have room for a full-size model, these are generally more versatile and powerful.
First off, consider how often you’ll put your table saw to use. If you work in the fields of contracting or carpentry, there’s a chance you’ll be using your new machine pretty often—so you may as well invest in a more expensive, heavy-duty table saw that’s sure to last longer than the average model. On the other hand, hobbyists and weekend woodworkers won’t need a pricey piece of machinery—a more compact and inexpensive model should do just fine, especially if you’re only working on smaller projects like birdhouses and DIY wooden models.

DEWALT DW745S compact work table saw with folding stand

×