The DeWalt doesn’t go above and beyond here but has some standard safety equipment as part of its Site-Pro Guarding System. The Blade Guard Assembly is a standard clear plastic set of guards that allows the wood to be fed to the blade but shields you from putting hands on the exposed blade in a slip. The guards will lock in a raised position when you need to see the blade—for example, when adjusting the blade height—which lessens the temptation to remove this safety feature when it’s in your way.
The earliest examples of woodworking date all the way back to Ancient Egypt. According to cave drawings, wood was being used to build beds, chairs, stools and chests. During this time, Egyptians are also believed to have invented the art of gluing pieces of wood together – a practice that’s known as veneering today. But woodwork perhaps was made most famous in the Bible, where Noah’s efforts at building the ark over the course of 120 years were documented in detail. The directions issued in the Bible required Noah to create a water vessel 300 cubits long, 50 cubits wide and 30 cubits high, which would be 450 by 75 by 45 feet when converted to modern measurement methods.
But it’s a journey that’s still in progress. The DCS7485B is lightweight and portable, and it’s also very quiet. What it can’t do is hard work for an extended period. The battery just isn’t there and the trade-off for 60 volts of power limits the range of what you can legitimately expect to cut through. It’s possible to upgrade the battery, but our reviews are based on what comes inside the box. And what comes inside the box with this one has a good deal of promise for only a little bit of delivery.
What We Liked: This table saw not only rolls around your current job site, but you can easily pack it up and take it on the go with you. Despite its lightweight build, it packs plenty of durability, with a tough metal cage that keeps things sturdy while you’re working. You’ll also get a 15-Amp, 5800 RPM motor that provides both accuracy and efficiency.

But, that’s also a pretty minor thing in the larger scheme of things. And so the difference in price between these models is enough to make the DW745 our “best for the money” choice. You can pick this up and get a legitimately good, portable, powerful job site saw and only trade a little in rip capacity. How much? This one has 20 inches, compared to 32.5 inches for the DWE7491RS.


If you’re looking for a machine with high capacity, the SKIL 3410-02 has a 3.5-inch cut height with the ability to cut through four times the material on each pass. The consensus among reviewers is that, for such a low price, you end up compromising on miter gauge and saw blade quality. Luckily both of those things can be replaced if you so choose.  

dwe7491rs notice


Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

accessories for dwe7491rs


RPM plays a major role in deciding the amount of revolutions the blade can perform in a minute with 745 performing 3850 rpm. This is really good that the blade can roll 3850 times per minute and get the work done easily. The durability of the table is for a 3 year time period which is good considering the usage of the product. Indeed a good table saw by Dewalt.

The 8 Best Dewalt Table Saw Review For 2020 (Ultimate Buyer's Guide) - Home Stuff Pro


We fell in love with the idea of the DCS7485B. It’s battery-powered, lightweight, quiet, and super portable. That means taking it to a job site won’t in itself be a workout. But the battery just doesn’t deliver quite yet, so while we’re keeping our eyes open for new innovations in the technology, right this minute we suggest that if you have any serious work to do that you look to a more robust model.
I am looking at getting a saw, and this has helped, but still leaves a lot of confusion. most of my work would be diy projects, maybe shelving, who really know. The main reason for buying one, is I am looking to build some SUP’s. (Stand Up Paddle boards) I will be ripping 10-12′ 1/4″ strips that maybe in the 3/8″ up to 3″ range, along with re-sawing some wider planks into the 1/4″ thick, 5-6″ wide plank’s. I have been going back and forth on the Dewalt dwe7491rs vs the Delta 36-725t2 vs the comparable Ridgid. Any thoughts? the Dewalt would be nice as it packs away in a smaller space, but the delta/ridgid would also be easily moved out of the way. with the Dewalt, I would probably end up making an outfeed bench. price points they are all similar, I am just not sure what would be the best for this type of work. thanks for any input.

dwe7491rs agreement


Your Amish neighbors think they’re so impressive, with their beards, and their shirt hooks, and their aversion to power tools. Now you’ve got a chance to show those jerks up while both of you add on to outbuildings. But your advantage—the willingness to use powered technology—will get prove your downfall if you can’t use it on site. So, you’ve hit the Internet to check out Dewalt table saw reviews to see which one will help you crush your buggy-driving neighbors.

dwe7491rs given set


If you’re working out of your garage, you may not have room for a full-size, standalone table saw. There are several tabletop models available that provide a smaller (and typically less expensive) alternative with the same wood-cutting capabilities. However, if you do have room for a full-size model, these are generally more versatile and powerful.
With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

blade guard dewalt dwe7491rs


Upon unboxing, I wasn’t sure how much I cared that the built-in stand for this saw had wheels, but, boy, did I ever use them. If weather rolled in, the saw folded up and rolled to shelter in the garage. This was extremely convenient since I did my cutting in the driveway and stored the saw in the garage overnight. This maneuverability might be less useful to you if you plan to use the saw primarily in your garage where you could build or buy a semi-permanent stand rather than use the fold-up stand of this model. There is also on-board storage for the power cord and the loose parts such as the miter gauge and guards, making it completely self-contained.
You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.

Best Table Saws for Woodworking 2020 - Reviews & Top Picks


On the other end of the handyman spectrum, you’ve got the seasoned professional with years of experience under his belt. We all know the type: he’s the guy that expects only the best, and DEWALT more than delivers with their patented DWE7491RS. This wood-slicing machine is the cream of the crop when it comes to cutting through even the toughest materials. The DWE7491RS measures 26.25 x 22 inches, so it’s a relatively large apparatus—you’re going to want to make sure that you have plenty of space in your garage for this table saw.
Thank you for reviewing these saws, one important thing all should do before making the purchase, after reading these reviews. Once you’ve selected a saw you like from this review, look at consumer reviews of the saw you’re leaning towards buying to see what experience people have had over time using the saw. To review a saw out of the box is fine for it’s features etc., how it performs over time is also very important. There is one other, service from the manufacturer. Is the manufacturer in the habit of making models obsolete, and therefore parts can no longer be available, such as the Ridgid saw I purchased. Food for thought.

If you choose a portable table saw, cut a hole in a three-quarter-inch piece of plywood and attach it to the table. This one extra move will let you attach your table saw to sawhorses for extra stability. It also lifts the table saw to a level that’s more comfortable. The hole provides extra cooling for your equipment while also allowing sawdust to drop through.
Going through hybrid table saw reviews, you can tell that accuracy is a bit less compared to cabinet saws and contractor table saws. This is no surprise as the other two are large with lots of operating power. Hybrid table saws are lightweight and can be moved easily from one location to another. The working space on the tabletop is less and cannot accommodate large pieces. They’re also a lot more wallet-friendly.

circular table saw dwe7491rs

×