Rip capacity is a jargony-sounding term that refers to the size of the piece you can cut. Bigger saws tend to—ta-da—have the ability to cut larger pieces of wood. This can be important because woodworking often involves using large pieces of wood used either in remodeling homes or building new additions. If you need the flexibility of handling large pieces of wood, you’ll want to give serious consideration to the rip capacity of the saws you’re looking at because it’ll come into play at some point.

dwe7491rs for the manufacture of cupboards


Balancing heavy-duty durability and lightweight design, this machine proves that good things can come in small packages. While buyers are overall happy with their purchases, they do seem to all agree on one thing: the DEWALT DWE7480 may be an overall investment, but it could seriously do with a miter gauge replacement. Buyers report replacing its inaccurate, plastic gauge for a solid, more detailed one.

dewalt dwe7491rs against bosch 4100-09


This table saw was completely redesigned and heavily improved in both safety measures and cutting capacity. For safety, DeWalt redesigned the red power switch to be electronic. It automatically resets the saw to turn off if the power is interrupted whatever the cause. I’ve heard some job-site horror stories regarding table saws who weren’t turned off properly so this redesign was very much needed.
I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.
Thank you for reviewing these saws, one important thing all should do before making the purchase, after reading these reviews. Once you’ve selected a saw you like from this review, look at consumer reviews of the saw you’re leaning towards buying to see what experience people have had over time using the saw. To review a saw out of the box is fine for it’s features etc., how it performs over time is also very important. There is one other, service from the manufacturer. Is the manufacturer in the habit of making models obsolete, and therefore parts can no longer be available, such as the Ridgid saw I purchased. Food for thought.

DEWALT table saw holder, mobile / rolling (DWE74911)


Stephanie Faris is a novelist and business writer whose work has appeared on numerous blogs. She worked for the State of Tennessee for 19 years, the latter six of which were spent as a supervisor. She has written content for entrepreneurs and marketing firms since 2011. In addition to her online content, she is also the author of eight novels for Simon & Schuster, including the Piper Morgan chapter book series.
Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.
"The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less-robust stand, and after viewing it in a big box store, I was glad to have this one."—Justin Park, Product Tester

dwe7491rs for carpentry


I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.
The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.

Obviously, given its size, the TruePower 01-0819 isn’t the kind of table saw you’d spring for to take on larger projects that require greater motor power — after all, it’s by no means revolutionary in the torque department. But for those who work with smaller materials or softer wood, the Gino Development TruePower 01-0819 Mini Electric Table Saw is a worthwhile, no-frills buy that’s easy on the wallet and can fit in virtually any space with plenty of room to spare.

dwe7491rs vs c10rj


But it’s a journey that’s still in progress. The DCS7485B is lightweight and portable, and it’s also very quiet. What it can’t do is hard work for an extended period. The battery just isn’t there and the trade-off for 60 volts of power limits the range of what you can legitimately expect to cut through. It’s possible to upgrade the battery, but our reviews are based on what comes inside the box. And what comes inside the box with this one has a good deal of promise for only a little bit of delivery.

DeWalt DWE7480 10 ″ table saw review for compact construction


The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.

dewalt dwe7491rs kaufen


The TruePower 01-0819 may look like a miniature version of a table saw — and that’s because it is! Ideal for hobbyist modelers and DIYers looking to tackle minor jobs, the 01-0819, while lacking the same power and performance as its larger, pricier counterparts, is a steal at under $50. A must for any toymaker’s workbench, this bite-sized machine measures in at 8.5 x 7 x 7 inches, and while it lacks important parts like a guide fence, it gets basic 1/2-inch wood or foam board cutting jobs done, slicing through softer materials with ease. 

dwe7491rs hp

×