The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.

dewalt dwe7491rs kaufen


The table saw is provided with a 10 inch blade which is compatible with all blade manufacturers which is good as in previous models that was a major drawback. The table saw can cut to a depth of 3 ⅛ inch at a 90 degree position and 2 ¼ inch at 45 degree position. The size of blade matters as it decides how deep can the blade protrude through the wood.

DEWALT DW745 Compact Job Site Table Saw Review - Tool Nerds


Balancing heavy-duty durability and lightweight design, this machine proves that good things can come in small packages. While buyers are overall happy with their purchases, they do seem to all agree on one thing: the DEWALT DWE7480 may be an overall investment, but it could seriously do with a miter gauge replacement. Buyers report replacing its inaccurate, plastic gauge for a solid, more detailed one.
What We Liked: This table saw kit includes everything you need to get started with a 20-Volt MAX compact half-inch drill driver, two 20-Volt MAX lithium-ion 1.3 Ah battery packs, 20-Volt MAX charger and a carrying bag for the drill. You’ll get a 15-Amp, 4800 RPM motor that has a 32.5-inch rip capacity to handle 4-by-8 plywood or OSB sheets. The table has on-board storage to give you a place to keep your guard, fence, wrenches and miter gauge when you aren’t using them.

The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.

dewalt dwe7491rs kaufen


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.
The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.
About the setbacks, only a few users have cited that the dado blade is hardly accommodated perfectly and that it features a flat-track gauge instead of a T-track, which might not keep the miter gauge appropriately in place. Other than that, this table saw is popular and it enjoys good reviews. So, if you value efficiency and meticulous works, this is the saw you should get.

In layman’s terms, a miter gauge is a device that allows users to set up the angle of the material being cut with a table saw. And while most table saws come with built-in miter gauges, others, well, don’t—which is why the Kreg KMS7102 Table Saw Precision Miter Gauge System is invaluable. Whether you’re replacing an old, worn-out gauge or putting it to use in conjunction with a table saw that didn’t come with its own proprietary gauge, the KMS7102 is specially designed with precision in mind. After all, accuracy is vital to successful woodwork.

difference between dwe7491rs and dwe7499gd


Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.
But it’s a journey that’s still in progress. The DCS7485B is lightweight and portable, and it’s also very quiet. What it can’t do is hard work for an extended period. The battery just isn’t there and the trade-off for 60 volts of power limits the range of what you can legitimately expect to cut through. It’s possible to upgrade the battery, but our reviews are based on what comes inside the box. And what comes inside the box with this one has a good deal of promise for only a little bit of delivery.

"The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less-robust stand, and after viewing it in a big box store, I was glad to have this one."—Justin Park, Product Tester

DEWALT DW745 Reviews – Worth The Price?


Stephanie Faris is a novelist and business writer whose work has appeared on numerous blogs. She worked for the State of Tennessee for 19 years, the latter six of which were spent as a supervisor. She has written content for entrepreneurs and marketing firms since 2011. In addition to her online content, she is also the author of eight novels for Simon & Schuster, including the Piper Morgan chapter book series.

DEWALT DWE7480 10 inch Compact site table saw with Site-Pro modular protection system

×