Upon unboxing, I wasn’t sure how much I cared that the built-in stand for this saw had wheels, but, boy, did I ever use them. If weather rolled in, the saw folded up and rolled to shelter in the garage. This was extremely convenient since I did my cutting in the driveway and stored the saw in the garage overnight. This maneuverability might be less useful to you if you plan to use the saw primarily in your garage where you could build or buy a semi-permanent stand rather than use the fold-up stand of this model. There is also on-board storage for the power cord and the loose parts such as the miter gauge and guards, making it completely self-contained.

Amazon.co.uk:Customer reviews: DEWALT DW745-GB Heavy Duty Table Saw, 250 mm


You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.

Best table saws 2020 - DeWalt, Bosch, SawStop & More


It accommodates a clean workspace with its dust port that you can link to the external accessories to keep that messy dust away. The face is great, easy to set up, and in its category, it is the best fence. You can adjust it with accuracy and quickly use the pinion fence rail and the rack. The only complaint is perhaps the miter gauge, otherwise, DeWalt DW745 is the best table saw you could ever have.

tear capacity dwe7491rs


Higher-End Models: The higher-end table saws ranged in price but were somewher between $ 500 - $800. These had a built-in "stand system", the largest table dimensions and the largest ripping capacities (both to the left and right side of the blade). The features were similar to the lower priced models though, so you are not paying for features, from what I've noticed.

Thank you for reviewing these saws, one important thing all should do before making the purchase, after reading these reviews. Once you’ve selected a saw you like from this review, look at consumer reviews of the saw you’re leaning towards buying to see what experience people have had over time using the saw. To review a saw out of the box is fine for it’s features etc., how it performs over time is also very important. There is one other, service from the manufacturer. Is the manufacturer in the habit of making models obsolete, and therefore parts can no longer be available, such as the Ridgid saw I purchased. Food for thought.


If you’re looking for a machine with high capacity, the SKIL 3410-02 has a 3.5-inch cut height with the ability to cut through four times the material on each pass. The consensus among reviewers is that, for such a low price, you end up compromising on miter gauge and saw blade quality. Luckily both of those things can be replaced if you so choose.  

There are a couple of other options, as well. There are hybrid table saws, which fall solidly between a cabinet saw and a job site saw. For crafters, it might be worth it to look into a mini saw, which measures only a few inches and has moving parts. These saws are mostly used for model building, but they can also be put to use in woodworking projects.


If you’re working out of your garage, you may not have room for a full-size, standalone table saw. There are several tabletop models available that provide a smaller (and typically less expensive) alternative with the same wood-cutting capabilities. However, if you do have room for a full-size model, these are generally more versatile and powerful.

power dwe7491rs


I am looking at getting a saw, and this has helped, but still leaves a lot of confusion. most of my work would be diy projects, maybe shelving, who really know. The main reason for buying one, is I am looking to build some SUP’s. (Stand Up Paddle boards) I will be ripping 10-12′ 1/4″ strips that maybe in the 3/8″ up to 3″ range, along with re-sawing some wider planks into the 1/4″ thick, 5-6″ wide plank’s. I have been going back and forth on the Dewalt dwe7491rs vs the Delta 36-725t2 vs the comparable Ridgid. Any thoughts? the Dewalt would be nice as it packs away in a smaller space, but the delta/ridgid would also be easily moved out of the way. with the Dewalt, I would probably end up making an outfeed bench. price points they are all similar, I am just not sure what would be the best for this type of work. thanks for any input.

dwe7491rs agreement


Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

height dwe7491rs


You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.

dwe7491rs driving the extraction knife


This table saw kit includes everything you need to get started with a 20-Volt MAX compact half-inch drill driver, two 20-Volt MAX lithium-ion 1.3 Ah battery packs, 20-Volt MAX charger and a carrying bag for the drill. You'll get a 15-Amp, 4800 RPM motor that has a 32.5-inch rip capacity to handle 4-by-8 plywood or OSB sheets. The table has on-board storage to give you a place to keep your guard, fence, wrenches and miter gauge when you aren't using them.

blade guard dwe7491rs


ElectroSawHQ.com is a participant in the Amazon Services LLC Associates Program and the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, amazon.co.uk, amazon.ca, endless.com, smallparts.com, myhabit.com, and any other website that may be affiliated with Amazon Service LLC Associates Program, and the Amazon EU Associates Program.

assembly instructions dwe7491rs


The first step always has to be to make sure that you match a saw with your actual needs. It’s a pretty simple thing to go out and buy the biggest, angriest saw available and call it good. But your genuine needs might be modest enough that the biggest, angriest saw is also too much saw, which means that you’re just throwing away a bunch of money. The same goes for weight. If you’re a small-framed person who has difficulty lugging around heavy, bulky objects, you’ll want to tailor your saw to your frame. If you can’t use it, it’s the same thing as not owning it.

DWE7491RS

×