Our review of DeWalt table saws focused on two models that are very, very similar and one that harkens great advancements in the tool line that sadly has yet to fully come to fruition. The DWE7491RS and DW745 are very similar. The 7491 is slightly more powerful but also slightly heavier and both have miter gauges that should be replaced when purchasing the saws themselves. But the differences are slight enough that our choice of top pick comes down to the 7491’s larger rip capacity. That’s something that won’t affect a lot of people very often, so if your dollars are tight, you can go with a better for-dollar value with the DW745.
Thank you for reviewing these saws, one important thing all should do before making the purchase, after reading these reviews. Once you’ve selected a saw you like from this review, look at consumer reviews of the saw you’re leaning towards buying to see what experience people have had over time using the saw. To review a saw out of the box is fine for it’s features etc., how it performs over time is also very important. There is one other, service from the manufacturer. Is the manufacturer in the habit of making models obsolete, and therefore parts can no longer be available, such as the Ridgid saw I purchased. Food for thought.
With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.
Upon unboxing, I wasn’t sure how much I cared that the built-in stand for this saw had wheels, but, boy, did I ever use them. If weather rolled in, the saw folded up and rolled to shelter in the garage. This was extremely convenient since I did my cutting in the driveway and stored the saw in the garage overnight. This maneuverability might be less useful to you if you plan to use the saw primarily in your garage where you could build or buy a semi-permanent stand rather than use the fold-up stand of this model. There is also on-board storage for the power cord and the loose parts such as the miter gauge and guards, making it completely self-contained.

In layman’s terms, a miter gauge is a device that allows users to set up the angle of the material being cut with a table saw. And while most table saws come with built-in miter gauges, others, well, don’t—which is why the Kreg KMS7102 Table Saw Precision Miter Gauge System is invaluable. Whether you’re replacing an old, worn-out gauge or putting it to use in conjunction with a table saw that didn’t come with its own proprietary gauge, the KMS7102 is specially designed with precision in mind. After all, accuracy is vital to successful woodwork.

difference between dwe7491rs and dwe7499gd


Obviously, given its size, the TruePower 01-0819 isn’t the kind of table saw you’d spring for to take on larger projects that require greater motor power — after all, it’s by no means revolutionary in the torque department. But for those who work with smaller materials or softer wood, the Gino Development TruePower 01-0819 Mini Electric Table Saw is a worthwhile, no-frills buy that’s easy on the wallet and can fit in virtually any space with plenty of room to spare.


Dewalt DCS7485T1 is one of the table saws which the users prefer. The model is well recognised in the market with 8 ¼ inch blade size. The blade can cut it to a size of 2 ½ inch when placed at 90 degrees and 1 ¾ inch when placed at 45 degrees. The cut size matters to most professionals as with deep cuts lots of effort is put in which can lead to fatigue.

size of the dust port dwe7491rs


The warranty is for a period of 3 years which Dewalt provides to all their models irrespective of how good the product functions. The durability is good and also provides a powerful performance with almost 20amps of power generated from the device. The Better the power the better is the outcome of the product. Overall a great product provided by Dewalt.


I am looking at getting a saw, and this has helped, but still leaves a lot of confusion. most of my work would be diy projects, maybe shelving, who really know. The main reason for buying one, is I am looking to build some SUP’s. (Stand Up Paddle boards) I will be ripping 10-12′ 1/4″ strips that maybe in the 3/8″ up to 3″ range, along with re-sawing some wider planks into the 1/4″ thick, 5-6″ wide plank’s. I have been going back and forth on the Dewalt dwe7491rs vs the Delta 36-725t2 vs the comparable Ridgid. Any thoughts? the Dewalt would be nice as it packs away in a smaller space, but the delta/ridgid would also be easily moved out of the way. with the Dewalt, I would probably end up making an outfeed bench. price points they are all similar, I am just not sure what would be the best for this type of work. thanks for any input.
DEWALT® table saws are available in both cordless and corded. Our portable table saws are compact for easy transportation between jobsites. They offer a rack and pinion fence system for fast, accurate fence adjustments. Our table saws are lightweight and feature a metal roll cage to ensure they can stand up to a rough jobsite. Tool-free guarding component adjustments make it faster and simpler to adjust as needed. Since the World’s First FLEXVOLT® cordless table saw was introduced, DEWALT has revolutionized the world of cordless construction tools. Every aspect of our table saws are designed to make your job easier.

dwe7491rs near


The table saw is run on battery and that is why it is regarded as one of the best models available with battery. The user though needs to purchase the battery separately. The device is not suitable for hard woodworking activities due to the blade size it comprises. Durability is good with a 3 year limited warranty and 1 year free service with 90 day money back guarantee.

dewalt dwe7491rs near the storage


RPM plays a major role in deciding the amount of revolutions the blade can perform in a minute with 745 performing 3850 rpm. This is really good that the blade can roll 3850 times per minute and get the work done easily. The durability of the table is for a 3 year time period which is good considering the usage of the product. Indeed a good table saw by Dewalt. 

power dewalt dwe7491rs


Without worrying much about the budget, the DEWALT DW745 is perhaps the best hybrid table saw you can get. It comes with a powerful motor, it is highly affordable, and it is a high-end tool that can double up as a job site table as well. At only 45 pounds, it is lightweight and can be moved from one location to another. This is why it is our top choice for homeowners.

image dwe7491rs


Stephanie Faris is a novelist and business writer whose work has appeared on numerous blogs. She worked for the State of Tennessee for 19 years, the latter six of which were spent as a supervisor. She has written content for entrepreneurs and marketing firms since 2011. In addition to her online content, she is also the author of eight novels for Simon & Schuster, including the Piper Morgan chapter book series.

In the short period that this particular table saw has been on the market, it is clear that it is not your average power tool. The sales have been good, which is no surprise as the DCS7485T1 is a beautifully compact and cordless table saw. It makes use of balanced power and portability. At only 48 pounds in weight and a no-load speed of 5800 rpm, you can blast plywood among other timber sizes with ease.

extension dewalt dwe7491rs


In layman’s terms, a miter gauge is a device that allows users to set up the angle of the material being cut with a table saw. And while most table saws come with built-in miter gauges, others, well, don’t—which is why the Kreg KMS7102 Table Saw Precision Miter Gauge System is invaluable. Whether you’re replacing an old, worn-out gauge or putting it to use in conjunction with a table saw that didn’t come with its own proprietary gauge, the KMS7102 is specially designed with precision in mind. After all, accuracy is vital to successful woodwork.
As with many table saws, the included plastic miter gauge isn’t nearly as precise as the fence and so I made angled cuts on a miter saw. If you are hoping to use this saw in lieu of a miter saw, you’ll probably want to invest in a higher-quality third party miter gauge. You can also attach a vacuum to this saw’s dust collection port for easy cleaning.

Thank you for reviewing these saws, one important thing all should do before making the purchase, after reading these reviews. Once you’ve selected a saw you like from this review, look at consumer reviews of the saw you’re leaning towards buying to see what experience people have had over time using the saw. To review a saw out of the box is fine for it’s features etc., how it performs over time is also very important. There is one other, service from the manufacturer. Is the manufacturer in the habit of making models obsolete, and therefore parts can no longer be available, such as the Ridgid saw I purchased. Food for thought.


In layman’s terms, a miter gauge is a device that allows users to set up the angle of the material being cut with a table saw. And while most table saws come with built-in miter gauges, others, well, don’t—which is why the Kreg KMS7102 Table Saw Precision Miter Gauge System is invaluable. Whether you’re replacing an old, worn-out gauge or putting it to use in conjunction with a table saw that didn’t come with its own proprietary gauge, the KMS7102 is specially designed with precision in mind. After all, accuracy is vital to successful woodwork.

Best Table Saws 2020 - DeWalt, Bosch, SawStop & More


But it’s a journey that’s still in progress. The DCS7485B is lightweight and portable, and it’s also very quiet. What it can’t do is hard work for an extended period. The battery just isn’t there and the trade-off for 60 volts of power limits the range of what you can legitimately expect to cut through. It’s possible to upgrade the battery, but our reviews are based on what comes inside the box. And what comes inside the box with this one has a good deal of promise for only a little bit of delivery.

DeWalt DWE7480 10 ″ table saw review for compact construction


Upon unboxing, I wasn’t sure how much I cared that the built-in stand for this saw had wheels, but, boy, did I ever use them. If weather rolled in, the saw folded up and rolled to shelter in the garage. This was extremely convenient since I did my cutting in the driveway and stored the saw in the garage overnight. This maneuverability might be less useful to you if you plan to use the saw primarily in your garage where you could build or buy a semi-permanent stand rather than use the fold-up stand of this model. There is also on-board storage for the power cord and the loose parts such as the miter gauge and guards, making it completely self-contained.
The table saw is run on battery and that is why it is regarded as one of the best models available with battery. The user though needs to purchase the battery separately. The device is not suitable for hard woodworking activities due to the blade size it comprises. Durability is good with a 3 year limited warranty and 1 year free service with 90 day money back guarantee.

dewalt dwe7491rs near the storage


Stephanie Faris is a novelist and business writer whose work has appeared on numerous blogs. She worked for the State of Tennessee for 19 years, the latter six of which were spent as a supervisor. She has written content for entrepreneurs and marketing firms since 2011. In addition to her online content, she is also the author of eight novels for Simon & Schuster, including the Piper Morgan chapter book series.
The earliest examples of woodworking date all the way back to Ancient Egypt. According to cave drawings, wood was being used to build beds, chairs, stools and chests. During this time, Egyptians are also believed to have invented the art of gluing pieces of wood together – a practice that’s known as veneering today. But woodwork perhaps was made most famous in the Bible, where Noah’s efforts at building the ark over the course of 120 years were documented in detail. The directions issued in the Bible required Noah to create a water vessel 300 cubits long, 50 cubits wide and 30 cubits high, which would be 450 by 75 by 45 feet when converted to modern measurement methods.

dwe7491rs for sale

×