However, it provides a bit less room to work, and it’s not as easy for newer woodworkers to use. The power/stop switch is rather small, and this one doesn’t have a digital angle display like the Grizzly. We highly recommend it to working professionals who need maximum cutting capacity in a minimal footprint. It’s also a good choice for ambitious DIYers who are short on space, but really know their way around a table saw.
Cutting dadoes can be done with a dado stack blade. I use the Freud 208. Blade changes are easy, and there is a lever that locks the blade in place so I can get a good yank on the nut with the included (and stored onboard) wrench. There is an accessory throat insert for the dado blade stack, but the standard throat will easily handle a ¼ thick stack, which is what I usually use.
I recently brought the Ryobi RTS21G after my dwe745 got stolen and actually couldn’t believe the quality! You guys were definitely right about using the Diablo blade, makes a big difference as it’s not the most powerful table saw in the world, but really didn’t expect much for $200 but i was very surprised. Anyway just wanted to say thanks for the great review and recommendation!

From the triple belt drive system, to the three-HP motor and the large cast iron table and wings, the Shop Fox W18193 s built like a tank. You’re also going to love the T-slot miter gauge that features a fence extension and flip stop, but also a four inch port for dust collection and camlock T-fence. There’s also a twenty nine and a half inch rip capacity.
PLEASE EXCUSE THE PICTURE, LUMBER JOCKS REQUIRED ONE. I AM AWAY FROM HOME AND COULDN’t RUN OUT TO THE GARAGE TO SNAP A SHOT. I am writing a review of my Bosch saw after a few months of use. I bought this saw last November after my Ryobi saw up and died during a project. I looked at several saws in the $600-$800 range and narrowed it down to four options. The Bosch and DeWalt jobsite saws, and the Delta and Ridgid contractor saws. My requirements were in a realativly compact saw th...
SawStop has an excellent stand and they’ve cleverly hidden the tool/miter/riving knife storage box under the side extension. Move the table extension and the box presents itself. Like DeWalt, two riving knives come with the saw—one with safety guards and one without. This keeps you from wondering how the pawls and guard go on the riving knife. Blade height fully adjusts with only one turn of the wheel. Not everyone was on board with this, citing less accuracy for dado and rabbet cuts. In the end, we showed we could be as accurate on the height as any of the other saws, so it’s a win.
This one’s compatible with Jet’s rolling bases. You can mount it on any of the company’s all-metal roller frames, and move it around your shop! That’s ideal for busy shops with a lot of large equipment and not a lot of space to spare. It’s also handy for home craftsmen who don’t have as much dedicated space as they’d like to devote to a table saw. The Grizzly, on the other hand, is much harder to convert to a wheeled base, because it has the dual extension tables.

In terms of size, the table height from floor measures thirty four inches, with extension it measures twenty seven by forty inches and overall dimensions are 62 by 41 by 40 inches (LWH). This is simply an amazing saw and not only will you use it for many years to come, but it’s going to help you get the professional results you’re looking for in any project.
But if you have the space for the DeWalt to sit upright at a work station or deep storage shelf, then it may be the better choice, thanks to its more comfortable adjustment controls. You won't be able to use a dado blade with the DeWalt (at least not safely), and the rip capacity is slightly smaller, but there's a reason why it's been popular for a while now. It's a great saw that delivers reliable performance.

post-template-default,single,single-post,postid-5859,single-format-standard,mkd-core-1.0.2,ajax_fade,page_not_loaded,,table saw theme-child-ver-1.0.0,onyx-ver-1.4.1,vertical_menu_enabled, vertical_menu_left, vertical_menu_width_290,vertical_menu_background_opacity_over_slider vertical_menu_background_opacity_over_slider_on,smooth_scroll,side_menu_slide_from_right,wpb-js-composer js-comp-ver-4.7.4,vc_responsive

You can opt to extend the warranty coverage to 3 years, all through an external provider. We actually prefer these third-party warranties for power tools because they allow you to deal with people who are on your side, as opposed to company representatives, who can be frustrating to say the least. We think add-on coverage is a great safeguard for any cabinet table saw, and it’s a very reasonable proposition on this model.

The first is how easy the switch is to operate. Oftentimes, you will approach your table saw with your hands full especially when we are talking about sheet goods. And sometimes you’ll be making cuts that require both hands to be occupied. Now if something goes wrong or you need to turn the saw off for any reason, you need to be able to do so and the quicker the better.

The DEWALT Table Saw is designed with a The DEWALT Table Saw is designed with a 15 Amp 4800 RPM motor that quickly rips through hardwoods with ease. With 24-1/2 in. of rip capacity this saw easily cuts a variety of larger shelving and trim materials. Rack and pinion telescoping fence rails make fence adjustments fast smooth and ...  More + Product Details Close
Kobalt’s KT1015 Table Saw features value pricing with a decent rolling stand. We initially had questions about its dual-locking fence, but found that it actually worked quite well. There’s plenty of wobble in it, but if you follow our Pro Tip on adjustments in the fences section, you can lock the front end in square then stabilize it with the back lock.
Whether your household’s resident handyman dabbles in amateur woodwork or takes pride in his DIY repair jobs, chances are he doesn’t need a high-end table saw to take care of his most basic needs. The Ryobi 15 Amp Table Saw is the ideal example of a machine that packs a load of must-have features you’d find in a higher-end table saw at a fraction of the price of competing models.
Safety and precision are usually at a high level. Some models even offer a sliding table as an option to mitigate cross-cutting. Needless to say, hobbyists love the sliding feature because it saves a lot of time and most importantly – nerves. As far as the driving mechanism goes, there are three possible options – single V-belt, serpentine belt, and a multiple V-belts.
function ffmChangeOmniCall(partNumber,price,storeType,ffm){s.linkTrackVars='prop12,channel,prop1,prop2,prop3,prop19,prop27,prop28,eVar18,eVar46,eVar50,events,products,eVar54';s.linkTrackEvents='scAdd,scOpen,event36,event37';'scAdd,scOpen,event36,event37';s.eVar54=storeType ;s.prop12='Add to Cart > PDP';var products=';'+trimString(partNumber)+'P;;;'+'event36='+price+'|event37=1;eVar50='+partNumber.trim()+'|eVar18=PDP|eVar46='+ffm+'|eVar54='+storeType ;s.products=products ;,'o','Add to Cart');}function getUrlVars() { var vars = {}; var parts = window.location.href.replace(/[?&]+([^=&]+)=([^&]*)/gi, function(m,key,value) { vars[key] = value; }); return vars;}function setOmValuesBillingPage(userId, frmPage, userType, itemId){var error="";var itemsIds=itemId.split(',');var itemIdProcessed='';s.pageName='Checkout >' + frmPage;'Checkout >' + frmPage;s.prop1='Checkout >' + frmPage;s.prop2='Checkout >' + frmPage;s.prop3='Checkout >' + frmPage;s.prop27='Checkout >' + frmPage;s.prop28='Checkout >' + frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17='';s.eVar45=userType;'event8';if(error !=""){s.prop20=error;}var path='';if(document.getElementById("checkoutPathForOmniture")!=null){path=document.getElementById("checkoutPathForOmniture").innerHTML;}if(path!=""){s.eVar15=path; + ',scCheckout';}for(var i=0;i 0){itemId=itemId + "" ; var length=11-itemId.length; for(var x=0;x PDP"){var partNumber=0 ; if (frmPage=="Product Summary"){partNumber=document.getElementById("partNum").innerHTML;storeType='null';ffm=document.getElementById("ffmChannelDelModeInApp").value;price=document.getElementById("displayedPriceFinal").innerHTML;}else if (frmPage=="Shopping Cart"){partNumber=document.getElementById("partNum").innerHTML ;storeType='null';ffm=document.getElementById("ffmChannelDelModeInApp").value;price=document.getElementById("displayedPriceFinal").innerHTML;}else{partNumber=document.deliveryTypeInv.partNum.value;price=document.deliveryTypeInv.itemPrice.value;storeType=document.deliveryTypeInv.selectedStoreType.value ;ffm=document.deliveryTypeInv.ffmChannelDelModeInApp.value;price=price/100.00;}price=price + "" ;if (price.indexOf(",") !=-1){price=price.replace(",", "");}var deals='';s.linkTrackVars='prop12,channel,prop1,prop2,prop3,prop19,prop27,prop28,eVar18,eVar46,eVar50,events,products,eVar54';s.linkTrackEvents='scAdd,scOpen,event36,event37';'scAdd,scOpen,event36,event37';s.eVar54=storeType ;s.prop12='Add to Cart > PDP';var products=';'+trimString(partNumber)+'P;;;'+'event36='+price+'|event37=1;eVar50='+partNumber.trim()+'|eVar18=PDP|eVar46='+ffm+'|eVar54='+storeType ;if(deals!=""){products +='|eVar56='+deals;}s.products=products ;,'o','Add to Cart');}else if(value=="Add to Cart > Product Options"){storeType=document.shoppingCartForm.storeType.value;s.linkTrackVars='prop12,channel,prop1,prop2,prop3,prop19,prop27,prop28,eVar18,eVar46,eVar50,events,products,eVar54';s.linkTrackEvents='event36,event37';s.prop12='Add to Cart > Product Options';'scAdd,scOpen,event36,event37';s.eVar54=storeType ;var valuesFromPage=document.shoppingCartForm.OmniValues.value;var splitted=valuesFromPage.split(";");var productsProcessed="";var totalPrice=0;var partN=0;var childSkus=0;for(var k=0; k < splitted.length ; k++){var values=splitted[k].split(",");price=values[1]+"";if (price.indexOf(",") !=-1){price=price.replace(",", "");}price=price/100.00; if(k > 0){childSkus=values[0]; if(productsProcessed==""){productsProcessed=';'+childSkus+'P;;;'+'event36='+price+'|event37='+'1'+';eVar50='+childSkus+'|eVar18=Product Options|eVar46='+ffm+'|eVar54='+storeType ;}else{productsProcessed +=',;'+childSkus+'P;;;'+'event36='+price+'|event37='+'1'+';eVar50='+childSkus+'|eVar18=Product Options|eVar46='+ffm+'|eVar54='+storeType ;}}}s.products=productsProcessed;,'o','Add to Cart');}else if(value=="Product Summary > See All Reviews"){s.linkTrackVars='prop12,prop10,channel,prop1,prop2,prop3,prop19,prop27,prop27,events,products';s.linkTrackEvents='event16';s.products=';'+s.prop10;'event16';s.prop12='Product Summary > See All Reviews';,'o','Product Summary > See All Reviews');}else if(value=="Create Profile"){s.linkTrackVars='prop12,prop10,channel,prop1,prop2,prop3,prop19,prop27,prop27,events';s.linkTrackEvents='event55';'event55';s.prop12='Create Profile';,'o','Create Profile');}else if(value=="Remove Product From Cart"){var partNum=document.shoppingCartForm.partNumForOmni.value;s.linkTrackVars='prop12,prop10,channel,prop1,prop2,prop3,prop19,prop27,prop28,events,products';s.linkTrackEvents='scRemove';s.prop12='Remove Product From Cart';'scRemove';s.products=';'+partNum;,'o','Remove Product From Cart');}else if(value=="Change Store Location > Search"){s.linkTrackVars='prop12,prop10,channel,prop1,prop2,prop3,prop19,prop27,prop27,events';s.linkTrackEvents='event44';'event44';s.prop12='Change Store Location > Search';,'o','Change Store Location > Search');}else if(value=="Buy At Store Click"){s.linkTrackVars='channel,prop1,prop2,prop3,prop27,prop28,events,products';s.linkTrackEvents='event64';'event64';s.products=';'+itemId;s.prop12=value;,'o','Buy At Store Click');}else if(value=="Item-Level Shipping"){s.linkTrackVars=value+','+value+','+value+','+value+','+value+','+value+','+value+','+value+','+value+','+value;s.prop12=value;s.prop10=itemId;s.prop25=value;,'o',value);}else if ( value=="Mens Category Click" || value=="Juniors Category Click" || value=="Kids/Toddler Category Click" || value=="Home Fashions Category Click" || value=="Misses Category Click" || value=="Accessories Category Click" || value=="Intimates Category Click" || value=="Footwear Category Click"){var prop1=value;s.linkTrackVars='prop12,prop10,channel,prop1,prop2,prop3,prop19,prop27,prop28';s.prop12=value;,'o',value);}else{s.linkTrackVars='prop12,prop10,channel,prop1,prop2,prop3,prop19,prop27,prop28';s.prop12=value;,'o',value);}if(toPage !="no"){if(newWindow=="no"){document.location.href=toPage;}else{;}}}function trimString(str){return str.replace(/^\s+|\s+$/g,"");}function setOmValuesOrderReview(userId,itemIdsInCart,zipCode){setOmValue("Review Order",userId,"Registered",itemIdsInCart,zipCode);}function setOmValues(){var frmPage="HomePage";var userId="1234567";var userType='Anonymous';setOmValue(frmPage,userId,userType,null,null);}function setOmValue(frmPage,userId,userType,itemIdsInCart,zipCode){var vertical="";var category="";var subcategory="";userId=userId + "" ;var zip='';if(document.getElementById("zipForOmni")!=null){zip=document.getElementById("zipForOmni").innerHTML;}else{zip='';if(zip==null){zip='';}}if(frmPage=="Review Order"){zip=zipCode;}var error="";var storeType="null";s.eVar47 = getUrlVars()["gclid"];if(frmPage=="Product Summary" || frmPage=="Print Page" || frmPage=="Inventory"){s.pageName=frmPage;;s.prop1=vertical + '>' + category;s.prop2=vertical + '>' + category + ' > ' + subcategory;s.prop27=frmPage;s.prop28=vertical + ' > ' + frmPage;s.eVar17=zip;s.eVar41='D=pageName';if(frmPage=="Product Summary"){var brand=document.deliveryType.brand.value;s.prop3=brand;s.eVar40='Browse';var itemId='null';s.prop10=itemId;'prodView,event10,event28,event29,event56';s.products=';'+itemId + 'P;;;event29=3;eVar43='+brand;s.prop29='G3';s.eVar43=brand;if(document.getElementById("searchtext")!=null){s.prop17=document.getElementById("searchtext").value;}}else if (frmPage=="Print Page"){var itemId='null';var price='0' ; price=price / 100.00 ;price=price + "";if (price.indexOf(",") !=-1){price=price.replace(",", "");}s.prop3=subcategory;'event65,event66';var events=';'+itemId+'P;;;event66='+price+';eVar54='+storeType+'|eVar56='+category;var deals='';if(deals!=""){events=events+'|eVar56='+deals;};}}else if(frmPage=="Shopping Cart" || frmPage=="Delivery" || frmPage=="Shipping" || frmPage=="Review Order"){var path='';if(document.getElementById("checkoutPathForOmniture")!=null){path=document.getElementById("checkoutPathForOmniture").innerHTML;}var itemId='null';if( frmPage=='Delivery'){itemId='null';}else if( frmPage==='Shipping' ){itemId='null';}if(frmPage=="Review Order"){itemId=itemIdsInCart;}var itemIds=itemId.split(",");var itemIdProcessed='';s.prop1='Checkout >' + frmPage;s.prop2='Checkout >' + frmPage;s.pageName='Checkout >' + frmPage;'Checkout >' + frmPage;s.prop3='Checkout >' + frmPage;s.prop27='Checkout >' + frmPage;s.prop28='Checkout >' + frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45=userType;if(error !=""){s.prop20=error;}if(frmPage=="Shopping Cart"){'event1,scView';}else if(frmPage=="Delivery"){'event6';s.prop25='Order Level Delivery';}else if(frmPage=="Shipping"){'event5';s.prop25='Item Level Shipping';}else{'event14';}if(path!=""){s.eVar15=path; + ',scCheckout';}for(var i=0;i 12){s.products=itemIdProcessed;}}else if(frmPage=="HomePage"){s.pageName=frmPage;;s.prop1=frmPage;s.prop2=frmPage;s.prop3=frmPage;s.prop27=frmPage;s.prop28=frmPage;s.prop9=userId;s.eVar1=userId;s.eVar17=zip;s.eVar45=userType;s.eVar40='Browse';s.eVar41='D=pageName';}else if(frmPage=="Category" || frmPage=="Subcategory"){s.pageName=frmPage + '>' +category;;s.prop1=category + '>' + category;s.prop2=category + '>' + category;if(frmPage=="Subcategory"){s.prop2=category + '>' + category + '>'+subcategory;s.pageName=frmPage + '>' + category + '>'+subcategory;'event56';}s.prop3=category;s.prop27=frmPage;s.prop28=category + '>' + frmPage;s.prop9=userId;s.eVar1=userId;s.eVar17=zip;s.eVar45=userType;s.eVar40='Browse';s.eVar41='D=pageName';}else if(frmPage=="Compare"){s.pageName=frmPage;;s.prop1=frmPage;s.prop2=frmPage;s.prop3=frmPage;s.prop27=frmPage;s.prop28=category + ' > ' +frmPage;s.prop9=userId;s.eVar1=userId;s.eVar17=zip;s.eVar45=userType;s.eVar41='D=pageName';}else if(frmPage=="My Address Book" || frmPage=="Overview" || frmPage=="My Info" || frmPage=="My Wallet" || frmPage=="Order History Page" || frmPage=="Order Details Page"){s.pageName='Profile >' + frmPage;'Profile';s.prop1='Profile >' + frmPage;s.prop2='Profile >' + frmPage;s.prop3='Profile' + frmPage;s.prop27='Profile';s.prop28='Profile >' + frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45='Registered';}else if(frmPage=="Login Page"){zip=document.getElementById("zip_code").value;s.pageName=frmPage;;s.prop1=frmPage;s.prop2=frmPage;s.prop3=frmPage;s.prop27=frmPage;s.prop28=frmPage;s.prop9=userId;s.eVar1=userId;s.eVar17=zip;s.eVar45='Anonymous';}else if(frmPage=="Privacy Policy" || frmPage=="CA Privacy Policy" || frmPage=="Product Recalls" ||frmPage=="Terms Of Use" || frmPage=="Customer Service" || frmPage=="Price Match Policy" || frmPage=="Return Policy"){if(document.getElementById("zip_code")!=null){zip=document.getElementById("zip_code").value;}s.pageName='Customer Service >' + frmPage;'Customer Service';s.prop1='Customer Service >' + frmPage;s.prop2='Customer Service >' + frmPage;s.prop3='Customer Service >' + frmPage;s.prop27='Customer Service';s.prop28='Customer Service >' + frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45=userType;}else if(frmPage=="errorPage"){pageType=frmPage;}else if(frmPage=="Product Options"){s.pageName='Checkout >' + frmPage;'Checkout >' + frmPage;s.prop1='Checkout >' + frmPage;s.prop2='Checkout >' + frmPage;s.prop3='Checkout >' + frmPage;s.prop27='Checkout >' + frmPage;s.prop28='Checkout >' + frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45=userType;}else if(frmPage.indexOf("Promotions >") !=-1){;s.prop1=frmPage;s.prop2=frmPage;s.prop3=frmPage;s.prop27=frmPage;s.prop28=frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45=userType;s.pageName=frmPage;}else if(frmPage=="Shipping"){s.pageName='Checkout >' + frmPage;'Checkout >' + frmPage;s.prop1='Checkout >' + frmPage;s.prop2='Checkout >' + frmPage;s.prop3='Checkout >' + frmPage;s.prop27='Checkout >' + frmPage;s.prop28='Checkout >' + frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45=userType;if(error !=""){s.prop20=error;}}else if(frmPage=="Store Selection"){s.pageName='Checkout >' + frmPage;'Checkout >' + frmPage;s.prop1='Checkout >' + frmPage;s.prop2='Checkout >' + frmPage;s.prop3='Checkout >' + frmPage;s.prop27='Checkout >' + frmPage;s.prop28='Checkout >' + frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45=userType;}else if(frmPage=="Nationwide Delivery"){s.pageName='Checkout >' + frmPage;'Checkout >' + frmPage; s.prop1='Checkout >' + frmPage; s.prop2='Checkout >' + frmPage; s.prop3='Checkout >' + frmPage; s.prop27='Checkout >' + frmPage; s.prop28='Checkout >' + frmPage; s.prop9=userId ; s.eVar1=userId ; s.eVar17=zip; s.eVar45=userType;}else if(frmPage=="Store Selection"){s.pageName='Checkout >' + frmPage;'Checkout >' + frmPage; s.prop1='Checkout >' + frmPage; s.prop2='Checkout >' + frmPage; s.prop3='Checkout >' + frmPage; s.prop27='Checkout >' + frmPage; s.prop28='Checkout >' + frmPage; s.prop9=userId ; s.eVar1=userId ; s.eVar17=zip; s.eVar45=userType;}else if(frmPage=="Order Confirmation"){s.pageName='Checkout >' + frmPage;'Checkout >' + frmPage; s.prop1='Checkout >' + frmPage; s.prop2='Checkout >' + frmPage; s.prop3='Checkout >' + frmPage; s.prop27='Checkout >' + frmPage; s.prop28='Checkout >' + frmPage; s.prop9=userId ; s.eVar1=userId ; s.eVar17=zip; s.eVar45=userType; s.eVar42=''; if(error !=""){s.prop20=error;}state='';zip=zip;}else if(frmPage=="Checkout login"){s.pageName=frmPage;;s.prop1=frmPage;s.prop2=frmPage;s.prop3=frmPage;s.prop27=frmPage;s.prop28=frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45='Anonymous';}else if(frmPage=="Order Status"){s.pageName=frmPage;;s.prop1=frmPage;s.prop2=frmPage;s.prop3=frmPage;s.prop27=frmPage;s.prop28=frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45='Anonymous';}else if(frmPage=="Bundle Offers" || frmPage=="Apparel page"){s.pageName=frmPage;;s.prop1=frmPage;s.prop2=frmPage;s.prop3=frmPage;s.prop27=frmPage;s.prop28=frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45=userType;}else{s.pageName=frmPage;;s.prop1=frmPage;s.prop2=frmPage;s.prop3=frmPage;s.prop27=frmPage;s.prop28=frmPage;s.prop9=userId ;s.eVar1=userId ;s.eVar17=zip;s.eVar45=userType;}var s_code=s.t();if(s_code)document.write(s_code);}function setOmValuesVerticals(value,toPage,newWindow,events){var userid='1234567';userid=userid + "" ; var fromPage="HomePage";var userType="Anonymous";var category="";s.pageName='Vertical > ' + value;;s.prop1=value;s.prop2=value;s.prop3=value;s.prop27='Vertical';s.prop28=value + '> Vertical';s.prop9=userid;s.eVar1=userid;s.eVar17='';s.eVar45=userType;;s.eVar11='Vertical > ' + value;s.eVar41='Vertical > ' + value ;s.eVar40='Browse';var s_code=s.t();if(s_code)document.write(s_code);}function setOmValuesSearch(sourcePage,noOfItems,refinement,searchText){if(noOfItems > 0){s.pageName='Search Results';'Search Results';s.prop1='Search Results';s.prop2='Search Results';s.prop3='Search Results';s.prop27='Search Results';s.prop28='Search Results';'event25';s.prop48=sourcePage;s.prop49=noOfItems;s.eVar49=noOfItems;s.prop11=searchText;s.eVar40='Search';}else{s.pageName='No Search Results';'No Search Results';s.prop1='No Search Results';s.prop2='No Search Results';s.prop3='No Search Results';s.prop27='No Search Results';s.prop28='No Search Results';'event26';s.prop48=sourcePage ;s.prop49='zero';s.eVar49='zero' ;s.prop11=searchText;s.eVar40='Search';}var s_code=s.t();if(s_code)document.write(s_code);}function setOmValuesSearchClick(){var refinements=jQuery('input[name=refinementsForOmniture]').val();var finalNamesValue='';var finalName='';var namesAndValues=refinements.split('#');for(var i=0;i' + value ;finalName=name ;}else{finalNamesValue=finalNamesValue+'|'+name + '>' + value ;finalName=finalName+'|'+name ;}}s.linkTrackVars='prop4,prop5,channel,prop1,prop2,prop3,prop12,prop27,prop28';s.prop4=finalName ;s.prop5=finalNamesValue ;s.prop12='Search Refinement' ;,'o','Search Refinement');if(s_code)document.write(s_code);}function setOmValuesOrderConfirm(items,omsOrderId,paymentType){var productsProcessed='' ;var itemsIds=items.split(',');var x=0;var totalRevenue=0;var itemId;var revenue;var quant;var dealTypeId;var ffm;var adjustment;var couponCode;var storeType;for(var i=0;i 0){revenue=revenue * quant ;}revenue=revenue / 100.00 ; if(storeType=="" || storeType==null || storeType=="null"){storeType="Sears Outlet Store";}if(i==0){totalRevenue=revenue ; if(adjustment>0 && couponCode!="NA" && dealTypeId!="NA"){productsProcessed=';'+itemId +';'+quant+';'+revenue+';event57='+adjustment+';'+ 'eVar22='+dealTypeId+'|eVar29='+couponCode+'|eVar46='+ffm+'|eVar54='+storeType+ '|eVar55='+adjustment;}else if(adjustment>0 && couponCode!="NA"){productsProcessed=';'+itemId +';'+quant+';'+revenue+';event57='+adjustment+';'+ 'eVar29='+couponCode+'|eVar46='+ffm+'|eVar54='+storeType+ '|eVar55='+adjustment;}else if (couponCode!="NA" && dealTypeId!="NA"){productsProcessed=';'+itemId +';'+quant+';'+revenue+';;'+ 'eVar22='+dealTypeId+'|eVar29='+couponCode+'|eVar46='+ffm+'|eVar54='+storeType;}else if (adjustment>0 && dealTypeId!="NA"){productsProcessed=';'+itemId +';'+quant+';'+revenue+';event57='+adjustment+';'+ 'eVar22='+dealTypeId+'|eVar46='+ffm+'|eVar54='+storeType+ '|eVar55='+adjustment;}else if(adjustment>0){productsProcessed=';'+itemId +';'+quant+';'+revenue+';event57='+adjustment+';'+ '|eVar46='+ffm+'|eVar54='+storeType+ '|eVar55='+adjustment;}else if(couponCode!="NA"){productsProcessed=';'+itemId +';'+quant+';'+revenue+';;'+ 'eVar29='+couponCode+'|eVar46='+ffm+'|eVar54='+storeType;}else if(dealTypeId!="NA"){productsProcessed=';'+itemId +';'+quant+';'+revenue+';;'+ 'eVar22='+dealTypeId+'|eVar46='+ffm+'|eVar54='+storeType;}else{productsProcessed=';'+itemId +';'+quant+';'+revenue+';;'+'eVar46='+ffm+'|eVar54='+storeType;}}else{if(adjustment>0 && couponCode!="NA" && dealTypeId!="NA"){productsProcessed=productsProcessed + ',' + ';'+itemId +';'+quant+';'+revenue+';event57='+adjustment+';'+ 'eVar22='+dealTypeId+'|eVar29='+couponCode+'|eVar46='+ffm+'|eVar54='+storeType+ '|eVar55='+adjustment;}else if(adjustment>0 && couponCode!="NA"){productsProcessed=productsProcessed + ',' +';'+itemId +';'+quant+';'+revenue+';event57='+adjustment+';'+ 'eVar29='+couponCode+'|eVar46='+ffm+'|eVar54='+storeType+ '|eVar55='+adjustment;}else if (couponCode!="NA" && dealTypeId!="NA"){productsProcessed=productsProcessed + ',' +';'+itemId +';'+quant+';'+revenue+';;'+ 'eVar22='+dealTypeId+'|eVar29='+couponCode+'|eVar46='+ffm+'|eVar54='+storeType;}else if (adjustment>0 && dealTypeId!="NA"){productsProcessed=productsProcessed + ',' +';'+itemId +';'+quant+';'+revenue+';event57='+adjustment+';'+ 'eVar22='+dealTypeId+'|eVar46='+ffm+'|eVar54='+storeType+ '|eVar55='+adjustment;}else if(adjustment>0){productsProcessed=productsProcessed + ',' +';'+itemId +';'+quant+';'+revenue+';event57='+adjustment+';'+ '|eVar46='+ffm+'|eVar54='+storeType+ '|eVar55='+adjustment;}else if(couponCode!="NA"){productsProcessed=productsProcessed + ',' + ';'+itemId +';'+quant+';'+revenue+';;'+ 'eVar29='+couponCode+'|eVar46='+ffm+'|eVar54='+storeType;}else if(dealTypeId!="NA"){productsProcessed=productsProcessed + ',' +';'+itemId +';'+quant+';'+revenue+';;'+ 'eVar22='+dealTypeId+'|eVar46='+ffm+'|eVar54='+storeType;}else{productsProcessed=productsProcessed + ',' +';'+itemId +';'+quant+';'+revenue+';;'+'eVar46='+ffm+'|eVar54='+storeType;}totalRevenue=totalRevenue + revenue ;}}s.products=productsProcessed ;s.pageName='Checkout > Order Confirmation';'Checkout > Order Confirmation';s.prop1='Checkout > Order Confirmation';s.prop2='Checkout > Order Confirmation';s.prop3='Checkout > Order Confirmation';s.prop12='Checkout > Order Confirmation';s.prop27='Checkout > Order Confirmation';s.prop28='Checkout > Order Confirmation';'purchase';if(adjustment>0){'purchase,event57';}s.purchaseID=omsOrderId;s.eVar20=paymentType;s.eVar48="NON_LOYALTY_ORDER";var s_code=s.t();if(s_code)document.write(s_code);}
I can’t tell you how many times we’ve pulled out other jobsite saws only to have accessories fall off, or require off-tool storage. Bosch designed the GTS1031, however, to securely hold all of its accessories, even including the arbor wrenches (both of them) and an allen wrench for adjusting the riving knife and dust ejection points among other things. Our favorite was the rip fence, which simply flipped upside down and stored underneath the table – clever! About the most difficult adjustment was the riving knife, which is a tool-less maneuver, but one which requires you to stick your hand way into the blade cavity to reach the release lever. When making any adjustments to the blade, it goes without saying (but we’ll say it anyway) to disconnect power to the saw as a precaution.
If you’re a home DIYer or pro working mainly from a shop, you may have a wide table or countertop big enough to use the saw without any accessory stand. We would caution against working on sawhorses, though, as they can be wobbly and unsafe. It’s far better to spend a few extra dollars on a sturdy stand than to take risks with a rickety, improvised setup.
You want to rip down lumber with your table saw. For this you’ll need a fence. You just can’t make an accurate rip cut without one. Check the fence sits on the rails firmly. You should be able to adjust it easily in both directions. A T-square fence is the most common type. Made from welded steel, it’s precise, user-friendly and durable. Some fences are mounted with bolts. Others are welded onto the head of the T-square. Miter gauges are priceless for making cross-cuts and other more advanced cuts. This gauge acts as a guiding device. It moves in the miter slot. You can angle between 45 degrees and -45 degrees. For angled or square cross-cuts or other specialty cuts, a miter gauge fully delivers.
Even a newbie can go around the table saw section at the local home improvement store and feel that some saws have easier adjustments than others. Some are simply easier while others are downright innovative in various ways. Porter-Cable came out of the value group for the overall win with adjustments that are both smooth and intuitive. Dual adjustment wheels mean that you’ll be able to accurately adjust your blade height and your bevel angle—a feature no other saw in this group has.
I’m no stranger to Bosch’s 4100-09 saw with Gravity-Rise™ stand. I’ve used one several times to build projects for this magazine, including the Serving Tray Cart that appeared in the June issue. So, I was not surprised when it tested impressively here. Rip cuts were on the mark, thanks to a rugged, beefy fence that stayed parallel to the blade each time I reset it. A flip of a red lever underneath unlocks the rails so they slide out and extend ripping capacity up to 25″.
One drawback is because of the way the blade is stopped, you will want to have an extra blade brake on hand because once it’s used, it cannot be reused. So, if you don’t have another handy, you will have some downtime. Also, the stopping of a blade moving at thousands of RPM can understandably be very hard on the blade itself. Often, the blade may need to be replaced after it has been stopped in this way. Still better than losing a thumb.
The quiet, 220-volt motors in these saws cut through the hardest stock, hour after hour, without bogging down. Cabinets are metal and extend to the floor for the best dust collection. The tops are cast iron, wide, and stable, which makes it easy to cut sheet goods. The trunnions are cabinet-mounted, so you get minimal vibration and maximum accuracy. They're also heavy; some weigh over 600 pounds. Once a cabinet saw's in place, that's where it stays.
At first glance, the Bosch 10-Inch Worksite Table Saw may seem to be nothing exceptional. However, it's powered by the best motor in its class, and it does everything well. True, the motor is a 15 amp unit like the others on our list, but it produces 4 HP where the others produce only 1.5 to 2 HP. This is a noticeable step up in a vital area! The wheeled frame is extremely helpful for moving around your shop or garage, but keep in mind that those tires aren’t heavy-duty; you have to be careful with them on a worksite littered with nails and screws.
I really do like your site and being on Long Island there is a familiarity to the way y’all work. You are quick to respond to comments and put in a great effort but…. This review I feel you miss the mark. Out of box accuracy is important but. Ore important to a pro user is tool able to be adjusted to be near perfect and how does it hold this position. No comments on how solid the fences are, ie deflection movement, ease of micro adjust, etc. all the fancy self feed stuff etc, what saw feels the most powerful? Smoothest ? All theses kizmos are for the manufacturers to hype. Your strengths are that you actually use these machines, so your strengths are to BE MORE opinionated or biased not less because your opinion has meaning or weight. Let the know knowings use the kizmos and just give us your real opinions based on real use. Just my 2 cents.
I also added in a bicycle saddle bag, that attaches easily to the tube frame of the saw. In it, I keep my PPE, and my Grr-ripper push blocks (great upgrade over regular push blocks). I also have a push stick made of wood that was modeled after the plastic one mounted on the back of the saw. The wood one is there now. I read too many stories of injuries after the blade touched the plastic stick, which to me is the whole point of using a stick – to avoid injuries. These things turning to shrapnel seems like a bad idea.
Most shippers will expect you to have a forklift to get the crate off the truck, so if that’s not something you can arrange, you’ll want to opt for “lift-gate” delivery or an installation plan that involves the shippers bringing the saw to your actual workshop. Be prepared to spend a fair bit of money for delivery ($100-$250), especially if you can’t get the saw off the truck and to the workshop on your own.

All these saws have attached, collapsible stands with wheels that allow you to roll them around when they’re folded up. A few, like the DeWalt, Rockwell and Ryobi, can’t be wheeled around after they’re set up. But the biggest difference between stands is in how easy it is to set them up. The Ridgid and Bosch have nearly identical stands that work great and require you to only flip or depress one lever to unlock the stand. These are our favorites. The DeWalt stand is the sturdiest of the bunch and very intuitive. It sets up like a card table with legs that fold out and snap into place. The remaining candidates for best table saw have several different stand systems that aren’t quite as easy to set up but that work fine once you get the hang of them.
These are the best choice for long jobs where you’ll get yourself set up at a job site, and need a saw that enables you to make all your big, long cuts without traveling back and forth between the site and your shop. While you won’t want to move these units around frequently, they’re great for seeing a contract through to the end from the worksite.
The larger the motor, the higher the voltage as well, usually 240V. In some cases, you may be lucky and have a garage or workshop that’s wired for 240V, so that is why it’s very important that you check this prior to getting the table saw. In terms of the material thickness it can handle, it’s a minimum of three inches. One thing to bear in mind is that safety is an essential consideration with these saws and that’s because the powerful motors are prone to higher kickback.
One of the biggest perks of a cabinet table saw, aside from the rugged construction and wide worktop, is the sheer power of the tool. You should expect a cabinet table saw to cut absolutely any stock within its depth capacity smoothly and easily. Look for motors with at least 3 HP, and sophisticated belt drive systems which translate that grunt into 4000+ RPM blade speeds. Don’t accept lesser power ratings on a cabinet model: these are the gold standard of table saws for a reason!
This saw is great. I needed a portable saw that was accurate and this fit the bill. All I can say is BUY THIS SAW if you are in the market for something portable. It has everything you want in a table saw. Dust collection is good with a shop vac and I like that the miter gauge is full size and not a ‘mini’ one that come with most portable saws. The fence is aluminum with built in T-track which is very nice. It’s quiet and has a soft-start. I was especially impressed with t...
In addition, a top-quality fence should move smoothly and have a scale that’s accurate and easy to read. Our favorite is the DeWalt fence. The rack-and-pinion system keeps the fence parallel to the blade, and the micro-adjusting knob allows easy and precise fence positioning. Runners-up in this category for best table saw are the Ridgid and Bosch saws. They both have superb fences, with the added advantage of T-slots for attaching accessories like featherboards.

It can seem like plastic is a weight-saver on the part of the manufacturer, but it’s really a cost-saver. You shouldn’t accept shoddy build quality in the name of getting a lighter machine. While no portable unit will include heavy cast iron components like a cabinet table saw, you can find metal alternatives that offer rugged, long-lasting build quality. Instead of plastic, look for aluminum.

As far as performance, the fence could be a bit better in its locking in – square front to rear – but you get used to being able to set it square and use the rear adjustment knob so that it stays put. Some folks have complained about motor burn outs – but having experience now with 17 saws – over 6 years or more – I haven’t encountered the problem (maybe we’ve been lucky?)
This blade shares many features that come standard on other Diablo blades. The carbide teeth are cut from Diablo’s TiCo High Density Carbide. Perma-Shield non-stick coating helps the blade move through material with less friction, reducing heat that can lead to warping in addition to corrosion. Diablo’s Tri-Metal Shock brazing process ensures the teeth stay in place much longer than other blades and can withstand impacts that leave other blades in need of a dentist.
The first is how easy the switch is to operate. Oftentimes, you will approach your table saw with your hands full especially when we are talking about sheet goods. And sometimes you’ll be making cuts that require both hands to be occupied. Now if something goes wrong or you need to turn the saw off for any reason, you need to be able to do so and the quicker the better.
What 🤔?? I find it pretty rare to have to re-align the rack and pinion fence on the dewalt, but short of the first time figuring it out, it shouldn’t take more than 5-10 minutes to do. The time savings comes in not having to stick a tape to the fence every time you move it to ensure it’s parallel. I am excited to see other tool manufacturers are using rack and pinion fences now so that there are other options besides the dewalt, namely skil’s latest worm drive ts and the latest hitachi, I’m just not interested in any other fence system on a job site table saw.
IMPORTANT REVIEW UPDATE (10/4/2016): After doing some additional testing with pressure-treated lumber and heavier stock, we [initially] found some issues with the Bosch REAXX saw that we couldn’t explain—except to say that it didn’t have the power we expected for cutting through denser wood. The blade exhibited a significant drop in speed during many common ripping cuts, and it even stalled out entirely at other times. We contacted Bosch and worked directly with them to determine the nature of the issue (which appeared to have to do with the saw’s electronic speed control). Here is the initial statement from Bosch on the matter:
If you’re going to be transporting your unit regularly, you should aim to keep weight to a minimum. Look for something lightweight, with convenient carrying handles, or a stand that can be wheeled around dolly-style at the worksite. Conversely, if you’re only going to be using your portable saw occasionally, you can probably stand a bit more weight.
One thing manufactures noticed over the years was that when people used the splitters in normal straight cuts it worked well but it’s biggest downfall came when contractors wanted to do cross cuts. What would happen is that people would remove the splitters to make the cross cuts but then forget to fixed them back in place. One brilliant table saw safety feature is the riving knife. The Riving knife is attached directly to the blade mechanism, this allows it to always be attached not matter where or what angle the blade is.
Having only owned saws with cast iron tops this is a new experience for me. First let me note that the right side extension is not aluminum like the rest of the top. It is steel, painted to match. The entire top appears to be powder coated with a textured grey coating. No telling how durable it will be but it does allow wood to slide easily over it. Since the top is aluminum, it lets you know that by transferring all the motor noise and vibration throughout the saw. Not a big deal really but definitely different if you are used to the cast iron absorbing much of this on bigger saws.
Previous buyers said they were at a loss to find materials that the Jet couldn’t cut! They said it went like butter, with no lag whatsoever, and almost no vibration at all. Reviewers raved about the motor’s power, and especially complimented how steadily it ran. This is an excellent choice for hardwoods, thick softwoods, and composite boards: absolutely anything that’ll fit.
As far as performance, the fence could be a bit better in its locking in – square front to rear – but you get used to being able to set it square and use the rear adjustment knob so that it stays put. Some folks have complained about motor burn outs – but having experience now with 17 saws – over 6 years or more – I haven’t encountered the problem (maybe we’ve been lucky?)
The weak point of this rolling stand is the base where all the weight sits. I really like the Bosch rolling miter saw stand, which is what convinced me to buy this setup. When you compare the miter saw to this table saw, it's a night and day difference. The miter saw from Bosch has thicker and larger diameter metal tubing. It clearly weights more, but it's on wheels, and has yet to show any fatigue from constant use.
The first is how easy the switch is to operate. Oftentimes, you will approach your table saw with your hands full especially when we are talking about sheet goods. And sometimes you’ll be making cuts that require both hands to be occupied. Now if something goes wrong or you need to turn the saw off for any reason, you need to be able to do so and the quicker the better.
The more table size you have, the more support you have which is always a plus, not only for convenience but safety too. There are right side extensions that can be purchased for table saws that increase the table saw’s capacity to get to the center of a 4 x 8 sheet of wood. Although most saws have a rear band that supports the wood as it exits the saw, an additional safety measure is to rig up an outfeed support of some kind in addition to this rear bar. Be sure that the outfeed support you set up is ¼” lower than the table saw is.

When your skin contacts the blade even slightly, the charge transfers, and a switch flips on the motor, activating an instant brake. The aluminum brake swings into contact with the blade, stopping it instantly. The brake also propels the blade down through the arbor, so it retracts completely below your worktop. That means that other than the initial contact, you won’t touch the sharp edge at all.

We spent over 30 hours researching and testing 10 different brands of table saws and found that maximum speed, cord length, and cut depth were most important. The DEWALT DW7480 table saw scored high marks in every category and is our top pick. This 48 pound table saw is perfect for using at home or taking with you to the job site. It has a powerful 15 amp motor and 24” rip capacity that makes it a favorite with everyone. The 2 ½” dust collection port allowed us to connect the saw to a shop vac and reduce the amount of dust that was in the garage.
rarely have to work with stock that thick. I mostly prefer to do this on my bandsaw any way. The 2" dust port allows me to hook up the shop vac and it does a decent job of getting most of the dust. The saw doesn't have much room in front of the blade so it was impossible to use my shop made cutoff sled. I solved this problem by making my own removable infeed extension table. Now I can use the 22" cutoff sled. After a year and a half the saw is still in adjustment and runs true. The saw stays in my shop and doesn't get bounce around on the back of a pickup truck. Based on my experience I highly recommend this saw if you have a small shop and don't plan on building large pieces

Built on the 4100’s foundation, The Bosch REAXX exhibits similar performance with a few improvements. Despite what we’ve seen online, the REAXX did seem to have better cutting power than the 4100. (see Editor’s Note above) The narrow throat plate opening also gave it much better dust collection, allowing only the finest material to make its way out. It shares the top ranking gravity rise stand with the 4100.
We were impressed with the Bosch Glide Miter Saw which was revealed in 2010 and revolutionized the depth required by a saw in close quarters. Building on their solution-based approach to products, the company has finally addressed the need for a truly portable full-power jobsite table saw. The Bosch GTS1031 table saw can be carried by its single handle, which is balanced in the middle, and all accessories are safely and securely stored on-board. This was demonstrated wonderfully by none other than Jason Feldner at the 2011 Bosch Media Event, who came running into the room with the Bosch GTS1031 table saw in one hand and a GTA500 stand in the other. Weighing in at a manageable 52 pounds, and this is one 15-amp jobsite table saw that does a great job of balancing portability and raw cutting power.
You’ll make most of your miter cuts on a miter saw. But when the material you’re cutting exceeds a miter saw’s cross-cutting capacity, you turn to your table saw miter gauge. These usually aren’t quite as precise, but some manufacturers put more thought and robustness into it than others. If you make a lot of long miter cuts, be sure to pay attention to this accessory.
It’s highly portable. Even though the whole body feels sturdier than the Dewalt’s, it’s still relatively light, at just about 60 pounds. There are handles in both the top and bottom edges of the machine, for easy lifting, and once you’ve got the saw fixed to the base, you won’t have to lift it on your own except for when you’re loading it in the back of the truck/van.
Both the riving knife and the blade itself has a quick release design that lets you remove each one in minutes after accessing the arbor lock and without using any special tools either. The blade guard has a similar design that allows you to remove and replace it without any tools. This guard does a good job of keeping your hands and any other body parts safe as you use the saw.
Make sure all the panels on the cabinet (including the motor shroud) are made from steel, and look for powder-coating on the panels to help the paintwork last. The adjustment flywheels, the fence rails, and the frame of the table assembly should be steel as well. The most important part to look at under the hood is the trunnion. The trunnion supports the motor, and you’ll want it to be made from solid cast iron. The sturdier the trunnion, the smoother your unit will cut.
TBB measured the accuracy of the factory-set 45 degree stop by using a Wixey WR365 digital inclinometer. This device has an accuracy of 0.1 degree. We placed the Wixey gauge on the table and calibrated the inclinometer to the table by zeroing out the gauge. After that calibration, the measurements shown on the gauge give a result that is relative to the saw table. We attached the gauge to the blade and used the saw mechanism to adjust the blade incline to the point at which the blade or trunnion hit the factory-set 45 degree stop and recorded the measurement. TBB ran the test twice to ensure the repeatability of the measurement. In every case, the result came out to within 0.1 degree of the prior test.
The Craftsman table saw is one of the most compact of the bunch when it’s folded up. And if you can get it for the sale price of $260, it’s also the cheapest of the best table saw options. The blade guard and anti-kickback pawls are identical to the Porter-Cable and are the hardest of any of the saws to install. And they are the only two blade guards that don’t have a feature to hold them out of the way when you’re adjusting the blade or setting up the cut.
In layman’s terms, a miter gauge is a device that allows users to set up the angle of the material being cut with a table saw. And while most table saws come with built-in miter gauges, others, well, don’t — which is why the Kreg KMS7102 Table Saw Precision Miter Gauge System is invaluable. Whether you’re replacing an old, worn-out gauge or putting it to use in conjunction with a table saw that didn’t come with its own proprietary gauge, the KMS7102 is specially designed with precision in mind. After all, accuracy is vital to successful woodwork.
On the downside, Delta have changed things up over the past few years, and the news isn’t all good. The motor is still made in the USA, but the frame and structure of the saw is all imported. Recent buyers have reported shoddy quality control and very poor customer service since the company was taken over. Even though the Unisaw still gets great professional reviews, buyers’ experiences are so mixed that we’re not comfortable recommending this one as one of our top picks.
When I switched blades, I did find the locking lever for the riving knife very stiff … not sure why. It raises to release the riving knife and pushes down to lock it. I resorted to gripping the lever with a pliers to manipulate it, after nicking some skin on the blade teeth. But, on the softer side, RIDGID provides a nice complement of overmolds on the miter gauge handle and blade height handwheel knob.
Framing work is full of rougher cuts that rarely makes use of more than one blade at a time. But occasionally you might need dados for an onsite custom build in. If that sounds like you, be sure to find out the saw’s dado stack capacity. It requires a longer arbor and you won’t be able to use your normal throat plate for it. Some manufacturers offer a dado throat plate if they have the capacity for it.
I am a general contractor in the Midwest. I used the saw and stand a lot for the 1 week I've had it. Overall the saw works well, dado blades are easily interchangeable, and it's surprising quiet. However, the stand base bent on me today. I had it passively mounted in the rear of my enclosed 7x16 trailer. Opened the door this morning after arriving at the job site and it had sunken over. I thought maybe it had come out of the mount I made, but sadly that was not the case.
As accidents and injuries are common when using large power tools like this one, it’s important that you look for safety features such as a dust collection system. Inhaling the sawdust that comes off the wood can make you sick, but this system does a good job of removing the dust from your work area. The collection port itself has a convenient on the cabinet too.
The first is how easy the switch is to operate. Oftentimes, you will approach your table saw with your hands full especially when we are talking about sheet goods. And sometimes you’ll be making cuts that require both hands to be occupied. Now if something goes wrong or you need to turn the saw off for any reason, you need to be able to do so and the quicker the better.
Measuring 30.31" x 17.32" x 41.81", this powerhouse boasts a heavy duty 10" blade that can cut up to 4" x 4" of material in a single pass. For the handyman who likes to keep all of his tools within arm’s length, RIDGID’s table saw comes with convenient onboard storage so swapping out blades or accessing your tools is just a short reach away. Buyers are crazy for this table saw, and they report that it easily fits into the corner of their garages. Plus, quick and easy assembly means you can get to work straight out the gate.