With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

I am looking at getting a saw, and this has helped, but still leaves a lot of confusion. most of my work would be diy projects, maybe shelving, who really know. The main reason for buying one, is I am looking to build some SUP’s. (Stand Up Paddle boards) I will be ripping 10-12′ 1/4″ strips that maybe in the 3/8″ up to 3″ range, along with re-sawing some wider planks into the 1/4″ thick, 5-6″ wide plank’s. I have been going back and forth on the Dewalt dwe7491rs vs the Delta 36-725t2 vs the comparable Ridgid. Any thoughts? the Dewalt would be nice as it packs away in a smaller space, but the delta/ridgid would also be easily moved out of the way. with the Dewalt, I would probably end up making an outfeed bench. price points they are all similar, I am just not sure what would be the best for this type of work. thanks for any input.
Higher-End Models: The higher-end table saws ranged in price but were somewher between $ 500 - $800. These had a built-in "stand system", the largest table dimensions and the largest ripping capacities (both to the left and right side of the blade). The features were similar to the lower priced models though, so you are not paying for features, from what I've noticed.
Most crucial factor in deciding to purchase Dewalt table saws is the pricing of their products and also the features that each model provides. Each model is unique and is equipped with features that may vary from other models or similar in nature. Pricing a product depends on numerous factors like the material involved in developing a product, the technology employed etc.
The same goes for the kind of work you expect to do. Although a table saw is a pretty serious investment, you can trim money off your purchase if you don’t need something that will go through ash like a katana through a zombie. If you need the power or anticipate needing it in the future, you’ll want to invest extra to get it. So, be honest about what you’re going to need and tailor your major purchase to meet those needs.

sheet size dwe7491rs


Blades come in various types and sizes. There are rip blades for cutting along the wood grains, hollow ground blades ideal for various materials, crosscut blades suitable for smooth and precise cuts, and combination blades for that double up as blades for crosscutting and ripping. Depending on what you do the most, it’s necessary to choose the right blade type and size that will get the job done with the most ease.
Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

accessories for dwe7491rs


As with most job-site table saws on the market, the DWE7491RS comes with a rolling stand included in the box. The wheels are pretty heavy-duty and capable of handling rough terrain and even staircases I experienced no problems with. Besides the easy transportation, you can store you saw upright in its folded position in your van to save space. The same goes for your workshop of course. 
If you’re looking for a machine with high capacity, the SKIL 3410-02 has a 3.5-inch cut height with the ability to cut through four times the material on each pass. The consensus among reviewers is that, for such a low price, you end up compromising on miter gauge and saw blade quality. Luckily both of those things can be replaced if you so choose.  

tab counter dwe7491rs


This table saw was completely redesigned and heavily improved in both safety measures and cutting capacity. For safety, DeWalt redesigned the red power switch to be electronic. It automatically resets the saw to turn off if the power is interrupted whatever the cause. I’ve heard some job-site horror stories regarding table saws who weren’t turned off properly so this redesign was very much needed.
This table saw was completely redesigned and heavily improved in both safety measures and cutting capacity. For safety, DeWalt redesigned the red power switch to be electronic. It automatically resets the saw to turn off if the power is interrupted whatever the cause. I’ve heard some job-site horror stories regarding table saws who weren’t turned off properly so this redesign was very much needed.
But here we can start to dream. DeWalt’s DCS7485B is a saw you can use basically anywhere. It’s cordless, so you don’t have to worry about outlets and extension cords (except to charge batteries). Because of that, it’s also more compact and lighter than most models that have a power cord. The trade-off is that the battery life is limited, especially compared to wall power. Even with DeWalt’s features to increase its cordless power, it’s still not quite there yet compared to corded drills. But again, for the work you require of it, this might be a perfect fit.
Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.
This table saw kit includes everything you need to get started with a 20-Volt MAX compact half-inch drill driver, two 20-Volt MAX lithium-ion 1.3 Ah battery packs, 20-Volt MAX charger and a carrying bag for the drill. You'll get a 15-Amp, 4800 RPM motor that has a 32.5-inch rip capacity to handle 4-by-8 plywood or OSB sheets. The table has on-board storage to give you a place to keep your guard, fence, wrenches and miter gauge when you aren't using them.

dwe7491rs what's in the box


Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

accessories for dwe7491rs


Rip capacity is a jargony-sounding term that refers to the size of the piece you can cut. Bigger saws tend to—ta-da—have the ability to cut larger pieces of wood. This can be important because woodworking often involves using large pieces of wood used either in remodeling homes or building new additions. If you need the flexibility of handling large pieces of wood, you’ll want to give serious consideration to the rip capacity of the saws you’re looking at because it’ll come into play at some point. 

farm of the fleet dewalt dwe7491rs


The TruePower 01-0819 may look like a miniature version of a table saw — and that’s because it is! Ideal for hobbyist modelers and DIYers looking to tackle minor jobs, the 01-0819, while lacking the same power and performance as its larger, pricier counterparts, is a steal at under $50. A must for any toymaker’s workbench, this bite-sized machine measures in at 8.5 x 7 x 7 inches, and while it lacks important parts like a guide fence, it gets basic 1/2-inch wood or foam board cutting jobs done, slicing through softer materials with ease.
But it’s a journey that’s still in progress. The DCS7485B is lightweight and portable, and it’s also very quiet. What it can’t do is hard work for an extended period. The battery just isn’t there and the trade-off for 60 volts of power limits the range of what you can legitimately expect to cut through. It’s possible to upgrade the battery, but our reviews are based on what comes inside the box. And what comes inside the box with this one has a good deal of promise for only a little bit of delivery.
They are common, the lightest, and perhaps the cheapest. Portable table saw reviews show that these kinds of saws are the popular choice for homeowners looking to carry out simple tasks. The motors aren’t that powerful, some have tabletops that are retractable and can be moved from one place to another. They are inexpensive. The problem is that most have poorly built miter gauges and fences. 

10 inch DEWALT DW745R Table Saw

×