The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less robust stand, and after viewing it in a big box store, I was glad to have this one.

dwe7491rs blade storage


The table saw is provided with a 10 inch blade which is compatible with all blade manufacturers which is good as in previous models that was a major drawback. The table saw can cut to a depth of 3 ⅛ inch at a 90 degree position and 2 ¼ inch at 45 degree position. The size of blade matters as it decides how deep can the blade protrude through the wood.

DEWALT DW745 Compact Job Site Table Saw Review - Tool Nerds


Going through hybrid table saw reviews, you can tell that accuracy is a bit less compared to cabinet saws and contractor table saws. This is no surprise as the other two are large with lots of operating power. Hybrid table saws are lightweight and can be moved easily from one location to another. The working space on the tabletop is less and cannot accommodate large pieces. They’re also a lot more wallet-friendly.

sale dewalt dwe7491rs


What We Liked: This table saw kit includes everything you need to get started with a 20-Volt MAX compact half-inch drill driver, two 20-Volt MAX lithium-ion 1.3 Ah battery packs, 20-Volt MAX charger and a carrying bag for the drill. You’ll get a 15-Amp, 4800 RPM motor that has a 32.5-inch rip capacity to handle 4-by-8 plywood or OSB sheets. The table has on-board storage to give you a place to keep your guard, fence, wrenches and miter gauge when you aren’t using them. 

sheet dwe7491rs


There are two types of motors used in table saws: universal motors and induction motors. With a universal motor, the power source is linked directly to the blade, providing a whole lot of power. The downside is that these models are generally quite loud. Induction motors, on the other hand, are connected to a belt that then transfers power to the blade. As a result, you get quieter operation and the ability to cut dense materials. The downside is that these models require more preventive maintenance, as you have to adjust the belt’s tension periodically. 


Pre-calibrated right out of the box, Kreg’s miter gauge is a blessing for the impatient among us. The folks at Kreg know their customers don’t want to waste time preparing their tools — they want to use them! That’s why the KMS7102 boasts positive stops at a variety of the most common angles: so you can begin using your brand new miter gauge straight away.
Dewalt DCS7485T1 is one of the table saws which the users prefer. The model is well recognised in the market with 8 ¼ inch blade size. The blade can cut it to a size of 2 ½ inch when placed at 90 degrees and 1 ¾ inch when placed at 45 degrees. The cut size matters to most professionals as with deep cuts lots of effort is put in which can lead to fatigue.
Balancing heavy-duty durability and lightweight design, this machine proves that good things can come in small packages. While buyers are overall happy with their purchases, they do seem to all agree on one thing: the DEWALT DWE7480 may be an overall investment, but it could seriously do with a miter gauge replacement. Buyers report replacing its inaccurate, plastic gauge for a solid, more detailed one.

dewalt dwe7491rs against bosch 4100-09


This particular table saw features a high-torque motor of 15-amp, which is suitable for cutting hardwoods as well as the pressure treated timber. This is also aided by a speed of 4800RPM. The tool also features a rack, as well as a pinion telescoping fence rail that creates accurate, meticulous, and smooth fence adjustments. You can flip over the fence to make small and precision rip cuts.


Table saws come in a variety of types, sizes, and shapes. As with every other tool, each has its unique features and list of pros and cons. Some of these tools are versatile and can achieve many tasks, but sometimes, finding the perfect one that meets all your needs can be a hassle. The following are things you should consider when you set out to buy your table saw.

dewalt dwe7491rs notice


Upon unboxing, I wasn’t sure how much I cared that the built-in stand for this saw had wheels, but, boy, did I ever use them. If weather rolled in, the saw folded up and rolled to shelter in the garage. This was extremely convenient since I did my cutting in the driveway and stored the saw in the garage overnight. This maneuverability might be less useful to you if you plan to use the saw primarily in your garage where you could build or buy a semi-permanent stand rather than use the fold-up stand of this model. There is also on-board storage for the power cord and the loose parts such as the miter gauge and guards, making it completely self-contained.
I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.
Thank you for reviewing these saws, one important thing all should do before making the purchase, after reading these reviews. Once you’ve selected a saw you like from this review, look at consumer reviews of the saw you’re leaning towards buying to see what experience people have had over time using the saw. To review a saw out of the box is fine for it’s features etc., how it performs over time is also very important. There is one other, service from the manufacturer. Is the manufacturer in the habit of making models obsolete, and therefore parts can no longer be available, such as the Ridgid saw I purchased. Food for thought.

DeWalt FlexVolt Table Saw Review | Pro Tool Reviews


You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.

Best table saws 2020 - DeWalt, Bosch, SawStop & More


The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.
The table saw is run on battery and that is why it is regarded as one of the best models available with battery. The user though needs to purchase the battery separately. The device is not suitable for hard woodworking activities due to the blade size it comprises. Durability is good with a 3 year limited warranty and 1 year free service with 90 day money back guarantee.

parts for dwe7491rs


Table saws are made by many companies in the world and Dewalt is one of the leading companies that manufactures world class table saws. After a thorough comparison among various models of Dewalt table saws one can conclude that each model is unique and offers good features like high rpm, decent blade size, good dust collection system, excellent warranty period and so on. Check top selling dewalt table saw at amazon.

"The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less-robust stand, and after viewing it in a big box store, I was glad to have this one."—Justin Park, Product Tester

DEWALT DW745 Reviews – Worth The Price?


‡Total savings reflects sale price and instant rebate. Government of Canada Energy Savings Rebate Program get 25% Instant Rebate on selected ENERGY STAR certified dehumidifiers, smart thermostats and air purifiers. Taxes payable on price before rebate. Valid until September 30, 2020. Funded by the Government of Canada. Available in Ontario only. See details in store.

thickness of the dwe7491rs drive knife


Another excellent choice for the hobbyist or at-home handyman, the SKIL 3410-02 10-Inch Table Saw is a great value, giving you a durable build and quality performance at a wallet-friendly price. It doesn’t have the same brand recognition as some of the more expensive options on this list, but reviewers love this machine and say that it’s perfect for woodworking and DIY projects.

dwe7491rs best price


Measuring in at 19.9 x 23.4 x 13.4 inches, the SPT70WT-01 is compact enough to fit into any aspiring handyman’s garage, but powerful enough to tackle anything you throw at it on the job site, meaning it’s an ideal entry-level table saw for the amateur hoping to turn his hobby into a career. Sturdiness, durability, and anti-kickback technology make the world’s first worm drive table saw a revolutionary machine. Satisfied buyers can’t get enough of this balanced wood-devouring behemoth.

dwe7491rs Black Friday


Dewalt DCS7485T1 is one of the table saws which the users prefer. The model is well recognised in the market with 8 ¼ inch blade size. The blade can cut it to a size of 2 ½ inch when placed at 90 degrees and 1 ¾ inch when placed at 45 degrees. The cut size matters to most professionals as with deep cuts lots of effort is put in which can lead to fatigue.

size of the dust port dwe7491rs


Dewalt 7491RS is provided with a limited 3 year warranty wherein the users can replace the parts if found fault with. The product is provided with 90 days money back guarantee as well which very few companies provide to the consumer. Also the service is free for 1 year period which is really good. 7491RS weighs around 90 pounds which is a very bulky device to handle.
You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.
The design is among the first ones to vary voltage in alignment to the outfitted tool. Its versatility is unmatched. The battery usage can be easily shared as you customize the operation itself. Because of its lightweight and small nature, users can easily move it from one place to another. It also doesn’t require lots of space, which is why it is perfect for home garages and commercial spaces alike.

None of your woodworking projects will go wrong if you have the best table saw for your individual needs. Hopefully, with the above table saw reviews, you now have enough info to find your right fit. Although a comparison between the DWE7480 vs DW745 shows almost the same great features, our top pick is the DW745. Although it is small for some people, it is durable, has good speeds, is powerful, and most importantly, it is budget-friendly.

DEWALT DCS7485B FLEXVOLT 60V MAX table saw, 8-1 / 4 "

×