With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.
For homeowners without the luxury of a huge garage to fit their enormous table saw, DEWALT’s DWE7480 is a compact alternative to bulkier machines with the same wood slicing power. Measuring 25.8 x 26.5 x 13.9 inches, the DWE7480 hosts a 15-amp motor that cuts at an unbelievable 4800 rpm with a ten-inch blade, meaning this small package packs big performance—and with adjustable rear feet that are designed to allow users to level their table saw on uneven surfaces, you’ll be sure to get a clean, precise cut every time, no matter how rugged the terrain. An additional dust port makes collecting your sawdust a breeze—especially if you attach an optional shop vac extension.
The earliest examples of woodworking date all the way back to Ancient Egypt. According to cave drawings, wood was being used to build beds, chairs, stools and chests. During this time, Egyptians are also believed to have invented the art of gluing pieces of wood together – a practice that’s known as veneering today. But woodwork perhaps was made most famous in the Bible, where Noah’s efforts at building the ark over the course of 120 years were documented in detail. The directions issued in the Bible required Noah to create a water vessel 300 cubits long, 50 cubits wide and 30 cubits high, which would be 450 by 75 by 45 feet when converted to modern measurement methods.
If you’re looking for a machine with high capacity, the SKIL 3410-02 has a 3.5-inch cut height with the ability to cut through four times the material on each pass. The consensus among reviewers is that, for such a low price, you end up compromising on miter gauge and saw blade quality. Luckily both of those things can be replaced if you so choose.  

dwe7491rs notice


But it’s a journey that’s still in progress. The DCS7485B is lightweight and portable, and it’s also very quiet. What it can’t do is hard work for an extended period. The battery just isn’t there and the trade-off for 60 volts of power limits the range of what you can legitimately expect to cut through. It’s possible to upgrade the battery, but our reviews are based on what comes inside the box. And what comes inside the box with this one has a good deal of promise for only a little bit of delivery.

Without worrying much about the budget, the DEWALT DW745 is perhaps the best hybrid table saw you can get. It comes with a powerful motor, it is highly affordable, and it is a high-end tool that can double up as a job site table as well. At only 45 pounds, it is lightweight and can be moved from one location to another. This is why it is our top choice for homeowners.
In layman’s terms, a miter gauge is a device that allows users to set up the angle of the material being cut with a table saw. And while most table saws come with built-in miter gauges, others, well, don’t—which is why the Kreg KMS7102 Table Saw Precision Miter Gauge System is invaluable. Whether you’re replacing an old, worn-out gauge or putting it to use in conjunction with a table saw that didn’t come with its own proprietary gauge, the KMS7102 is specially designed with precision in mind. After all, accuracy is vital to successful woodwork.
‡Total savings reflects sale price and instant rebate. Government of Canada Energy Savings Rebate Program get 25% Instant Rebate on selected ENERGY STAR certified dehumidifiers, smart thermostats and air purifiers. Taxes payable on price before rebate. Valid until September 30, 2020. Funded by the Government of Canada. Available in Ontario only. See details in store.

dwe7491rs guard


The DeWalt doesn’t go above and beyond here but has some standard safety equipment as part of its Site-Pro Guarding System. The Blade Guard Assembly is a standard clear plastic set of guards that allows the wood to be fed to the blade but shields you from putting hands on the exposed blade in a slip. The guards will lock in a raised position when you need to see the blade—for example, when adjusting the blade height—which lessens the temptation to remove this safety feature when it’s in your way.
I am looking at getting a saw, and this has helped, but still leaves a lot of confusion. most of my work would be diy projects, maybe shelving, who really know. The main reason for buying one, is I am looking to build some SUP’s. (Stand Up Paddle boards) I will be ripping 10-12′ 1/4″ strips that maybe in the 3/8″ up to 3″ range, along with re-sawing some wider planks into the 1/4″ thick, 5-6″ wide plank’s. I have been going back and forth on the Dewalt dwe7491rs vs the Delta 36-725t2 vs the comparable Ridgid. Any thoughts? the Dewalt would be nice as it packs away in a smaller space, but the delta/ridgid would also be easily moved out of the way. with the Dewalt, I would probably end up making an outfeed bench. price points they are all similar, I am just not sure what would be the best for this type of work. thanks for any input.
Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

accessories for dwe7491rs


‡‡Shipping fees apply. Shipping fees and delivery times vary depending on location, size and weight of the item(s) and is only available within the province of the Canadian Tire retail location (“Store”) from which the item(s) was purchased. Bulk items will only be delivered within a 100km radius of the Store. Not available in Recontre East, NL. Conditions and restrictions apply. Visit https://www.canadiantire.ca/en/ship-to-home.html for more information.
They are common, the lightest, and perhaps the cheapest. Portable table saw reviews show that these kinds of saws are the popular choice for homeowners looking to carry out simple tasks. The motors aren’t that powerful, some have tabletops that are retractable and can be moved from one place to another. They are inexpensive. The problem is that most have poorly built miter gauges and fences.

10 inch DEWALT DW745R Table Saw

×