In the short period that this particular table saw has been on the market, it is clear that it is not your average power tool. The sales have been good, which is no surprise as the DCS7485T1 is a beautifully compact and cordless table saw. It makes use of balanced power and portability. At only 48 pounds in weight and a no-load speed of 5800 rpm, you can blast plywood among other timber sizes with ease.

extension dewalt dwe7491rs


In the short period that this particular table saw has been on the market, it is clear that it is not your average power tool. The sales have been good, which is no surprise as the DCS7485T1 is a beautifully compact and cordless table saw. It makes use of balanced power and portability. At only 48 pounds in weight and a no-load speed of 5800 rpm, you can blast plywood among other timber sizes with ease.

In layman’s terms, a miter gauge is a device that allows users to set up the angle of the material being cut with a table saw. And while most table saws come with built-in miter gauges, others, well, don’t—which is why the Kreg KMS7102 Table Saw Precision Miter Gauge System is invaluable. Whether you’re replacing an old, worn-out gauge or putting it to use in conjunction with a table saw that didn’t come with its own proprietary gauge, the KMS7102 is specially designed with precision in mind. After all, accuracy is vital to successful woodwork.


There are two types of motors used in table saws: universal motors and induction motors. With a universal motor, the power source is linked directly to the blade, providing a whole lot of power. The downside is that these models are generally quite loud. Induction motors, on the other hand, are connected to a belt that then transfers power to the blade. As a result, you get quieter operation and the ability to cut dense materials. The downside is that these models require more preventive maintenance, as you have to adjust the belt’s tension periodically. 

dwe7491rs draw game


Our review of DeWalt table saws focused on two models that are very, very similar and one that harkens great advancements in the tool line that sadly has yet to fully come to fruition. The DWE7491RS and DW745 are very similar. The 7491 is slightly more powerful but also slightly heavier and both have miter gauges that should be replaced when purchasing the saws themselves. But the differences are slight enough that our choice of top pick comes down to the 7491’s larger rip capacity. That’s something that won’t affect a lot of people very often, so if your dollars are tight, you can go with a better for-dollar value with the DW745.
This particular Dewalt table saw is our choice for commercial use. It features a 15-amp motor, which has an amazing speed of 4800 rpm. So, if you’re looking for a saw that incorporates high torque and power, this is one you shouldn’t pass up. The high number of spins in a minute can rip through several types of woods, which is why this model is ideal for different types of applications.
This particular table saw features a high-torque motor of 15-amp, which is suitable for cutting hardwoods as well as the pressure treated timber. This is also aided by a speed of 4800RPM. The tool also features a rack, as well as a pinion telescoping fence rail that creates accurate, meticulous, and smooth fence adjustments. You can flip over the fence to make small and precision rip cuts.
It accommodates a clean workspace with its dust port that you can link to the external accessories to keep that messy dust away. The face is great, easy to set up, and in its category, it is the best fence. You can adjust it with accuracy and quickly use the pinion fence rail and the rack. The only complaint is perhaps the miter gauge, otherwise, DeWalt DW745 is the best table saw you could ever have.

tear capacity dwe7491rs


Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

accessories for dwe7491rs


Blade size decides how deep can the wood log be cut and in different positions how well the product can protrude through the wood logs. Sometimes it does lead to confusion like is 10 inch better or 8 ¼ inch better, the answer is 10 inch is most suitable for professionals for work sites which involves heavy wood work and 8 ¼ inch would be preferable by home owners and DIYer’s. Hope this would be of help for the consumers to decide which Dewalt model would be suitable for them based on blade size.
In the short period that this particular table saw has been on the market, it is clear that it is not your average power tool. The sales have been good, which is no surprise as the DCS7485T1 is a beautifully compact and cordless table saw. It makes use of balanced power and portability. At only 48 pounds in weight and a no-load speed of 5800 rpm, you can blast plywood among other timber sizes with ease.
I am looking at getting a saw, and this has helped, but still leaves a lot of confusion. most of my work would be diy projects, maybe shelving, who really know. The main reason for buying one, is I am looking to build some SUP’s. (Stand Up Paddle boards) I will be ripping 10-12′ 1/4″ strips that maybe in the 3/8″ up to 3″ range, along with re-sawing some wider planks into the 1/4″ thick, 5-6″ wide plank’s. I have been going back and forth on the Dewalt dwe7491rs vs the Delta 36-725t2 vs the comparable Ridgid. Any thoughts? the Dewalt would be nice as it packs away in a smaller space, but the delta/ridgid would also be easily moved out of the way. with the Dewalt, I would probably end up making an outfeed bench. price points they are all similar, I am just not sure what would be the best for this type of work. thanks for any input.
If you work with wood in any capacity, chances are you rely on a table saw to make clean, accurate cuts. But when your good old saw goes to the big toolshed in the sky, it’s time to opt for a replacement. Before you dish out your hard-earned money on the first model you come across, remember that a table saw is a big investment, so it’s in your best interest to look into the many technical specifications of each option before you settle on a final purchase.

Compact Table Saw Showdown: Bosch vs Dewalt


With a 32½-inch rip capacity and motor capable of up to 4800 rpm, the DWE7491RS is more than prepared to effectively deliver 3⅛-inch deep cuts to thick slabs of wood. Happy customers sing this machine’s praises, reporting that it’s as sturdy as a table saw can get — plus, it’s easy to use, and assembling it is a cinch. They do however note that workers looking to produce finer cuts should seek out a replacement blade since the one provided is more suited for fast, rough work.
What We Liked: This table saw not only rolls around your current job site, but you can easily pack it up and take it on the go with you. Despite its lightweight build, it packs plenty of durability, with a tough metal cage that keeps things sturdy while you’re working. You’ll also get a 15-Amp, 5800 RPM motor that provides both accuracy and efficiency.
If you’re working out of your garage, you may not have room for a full-size, standalone table saw. There are several tabletop models available that provide a smaller (and typically less expensive) alternative with the same wood-cutting capabilities. However, if you do have room for a full-size model, these are generally more versatile and powerful.

power dwe7491rs


The shark fin-style riving knife behind the blade keeps cut pieces from binding and causing kickback. The included push stick is useful when using thinner workpieces that don’t allow your hand to be at least 4 inches from the blade. The power button’s flip cover ensures that you only turn the blade on when you mean to, which is a welcome layer of safety. 
If you choose a portable table saw, cut a hole in a three-quarter-inch piece of plywood and attach it to the table. This one extra move will let you attach your table saw to sawhorses for extra stability. It also lifts the table saw to a level that’s more comfortable. The hole provides extra cooling for your equipment while also allowing sawdust to drop through.

Rip capacity is a jargony-sounding term that refers to the size of the piece you can cut. Bigger saws tend to—ta-da—have the ability to cut larger pieces of wood. This can be important because woodworking often involves using large pieces of wood used either in remodeling homes or building new additions. If you need the flexibility of handling large pieces of wood, you’ll want to give serious consideration to the rip capacity of the saws you’re looking at because it’ll come into play at some point.
Dewalt DCS7485T1 is one of the table saws which the users prefer. The model is well recognised in the market with 8 ¼ inch blade size. The blade can cut it to a size of 2 ½ inch when placed at 90 degrees and 1 ¾ inch when placed at 45 degrees. The cut size matters to most professionals as with deep cuts lots of effort is put in which can lead to fatigue.

What We Liked: This table saw not only rolls around your current job site, but you can easily pack it up and take it on the go with you. Despite its lightweight build, it packs plenty of durability, with a tough metal cage that keeps things sturdy while you’re working. You’ll also get a 15-Amp, 5800 RPM motor that provides both accuracy and efficiency.

dewalt dwe7491rs. construction site


If you choose a portable table saw, cut a hole in a three-quarter-inch piece of plywood and attach it to the table. This one extra move will let you attach your table saw to sawhorses for extra stability. It also lifts the table saw to a level that’s more comfortable. The hole provides extra cooling for your equipment while also allowing sawdust to drop through.

dinner dewalt dwe7491rs


For homeowners without the luxury of a huge garage to fit their enormous table saw, DEWALT’s DWE7480 is a compact alternative to bulkier machines with the same wood slicing power. Measuring 25.8 x 26.5 x 13.9 inches, the DWE7480 hosts a 15-amp motor that cuts at an unbelievable 4800 rpm with a ten-inch blade, meaning this small package packs big performance—and with adjustable rear feet that are designed to allow users to level their table saw on uneven surfaces, you’ll be sure to get a clean, precise cut every time, no matter how rugged the terrain. An additional dust port makes collecting your sawdust a breeze—especially if you attach an optional shop vac extension.
The first step always has to be to make sure that you match a saw with your actual needs. It’s a pretty simple thing to go out and buy the biggest, angriest saw available and call it good. But your genuine needs might be modest enough that the biggest, angriest saw is also too much saw, which means that you’re just throwing away a bunch of money. The same goes for weight. If you’re a small-framed person who has difficulty lugging around heavy, bulky objects, you’ll want to tailor your saw to your frame. If you can’t use it, it’s the same thing as not owning it.
It accommodates a clean workspace with its dust port that you can link to the external accessories to keep that messy dust away. The face is great, easy to set up, and in its category, it is the best fence. You can adjust it with accuracy and quickly use the pinion fence rail and the rack. The only complaint is perhaps the miter gauge, otherwise, DeWalt DW745 is the best table saw you could ever have.

tear capacity dwe7491rs


The earliest examples of woodworking date all the way back to Ancient Egypt. According to cave drawings, wood was being used to build beds, chairs, stools and chests. During this time, Egyptians are also believed to have invented the art of gluing pieces of wood together – a practice that’s known as veneering today. But woodwork perhaps was made most famous in the Bible, where Noah’s efforts at building the ark over the course of 120 years were documented in detail. The directions issued in the Bible required Noah to create a water vessel 300 cubits long, 50 cubits wide and 30 cubits high, which would be 450 by 75 by 45 feet when converted to modern measurement methods.

dwe7491rs for sale

×