For homeowners without the luxury of a huge garage to fit their enormous table saw, DEWALT’s DWE7480 is a compact alternative to bulkier machines with the same wood slicing power. Measuring 25.8 x 26.5 x 13.9 inches, the DWE7480 hosts a 15-amp motor that cuts at an unbelievable 4800 rpm with a ten-inch blade, meaning this small package packs big performance—and with adjustable rear feet that are designed to allow users to level their table saw on uneven surfaces, you’ll be sure to get a clean, precise cut every time, no matter how rugged the terrain. An additional dust port makes collecting your sawdust a breeze—especially if you attach an optional shop vac extension.
But it’s a journey that’s still in progress. The DCS7485B is lightweight and portable, and it’s also very quiet. What it can’t do is hard work for an extended period. The battery just isn’t there and the trade-off for 60 volts of power limits the range of what you can legitimately expect to cut through. It’s possible to upgrade the battery, but our reviews are based on what comes inside the box. And what comes inside the box with this one has a good deal of promise for only a little bit of delivery.

dwe7491rs given plate


You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.
Rip capacity is a jargony-sounding term that refers to the size of the piece you can cut. Bigger saws tend to—ta-da—have the ability to cut larger pieces of wood. This can be important because woodworking often involves using large pieces of wood used either in remodeling homes or building new additions. If you need the flexibility of handling large pieces of wood, you’ll want to give serious consideration to the rip capacity of the saws you’re looking at because it’ll come into play at some point.

alignment of the fence dewalt dwe7491rs


∆∆The Triangle Rewards Program is owned and operated by Canadian Tire Corporation, Limited. Triangle™ Mastercard®, Triangle™ World Mastercard® and Triangle™ World Elite Mastercard® are issued by Canadian Tire Bank. Rewards are in the form of electronic Canadian Tire Money® (CT Money®). To collect bonus CT Money you must present a Triangle Rewards card/key fob, or use any approved Cardless method, at time of purchase or pay with a Triangle credit card. You cannot collect paper Canadian Tire Money on bonus offers. Any bonus multiplier is based on the base rate of collecting CT Money (0.4%), and will be added to whatever the Member would otherwise collect, without the bonus. Example: On a $100 (pre-tax) purchase with a 30X bonus multiplier a Member would earn a bonus $12 in CT Money (30 X .4% X $100). The 40X for Triangle Mastercard, World Mastercard and World Elite Mastercard customers consists of the 10X everyday plus a 30X bonus. Not all items sold are eligible to earn CT Money or to be redeemed for. Conditions apply. Visit triangle.com for full program rules and Partner location information. The offered rate is exclusive of any bonus or promotional offers or redemption transactions. CT Money is collected on the pre-tax amount of the purchase. Bonus CT Money collected from online orders will be applied to the Member’s Triangle Rewards Account within five weeks of the purchase date. No rainchecks.
The table saw is run on battery and that is why it is regarded as one of the best models available with battery. The user though needs to purchase the battery separately. The device is not suitable for hard woodworking activities due to the blade size it comprises. Durability is good with a 3 year limited warranty and 1 year free service with 90 day money back guarantee. 

miter groove dwe7491rs


Most professionals will opt for a contractor table saw, which is built for keeping in a shop. This type of saw has a heavy-duty motor and sturdy build. But if you want something that is portable with a heavier capacity, a job site table saw may offer that happy medium. Contractors who want the best of the best go for a cabinet saw, which has a much larger working space and huge rip fences.
Going through hybrid table saw reviews, you can tell that accuracy is a bit less compared to cabinet saws and contractor table saws. This is no surprise as the other two are large with lots of operating power. Hybrid table saws are lightweight and can be moved easily from one location to another. The working space on the tabletop is less and cannot accommodate large pieces. They’re also a lot more wallet-friendly.
I am looking at getting a saw, and this has helped, but still leaves a lot of confusion. most of my work would be diy projects, maybe shelving, who really know. The main reason for buying one, is I am looking to build some SUP’s. (Stand Up Paddle boards) I will be ripping 10-12′ 1/4″ strips that maybe in the 3/8″ up to 3″ range, along with re-sawing some wider planks into the 1/4″ thick, 5-6″ wide plank’s. I have been going back and forth on the Dewalt dwe7491rs vs the Delta 36-725t2 vs the comparable Ridgid. Any thoughts? the Dewalt would be nice as it packs away in a smaller space, but the delta/ridgid would also be easily moved out of the way. with the Dewalt, I would probably end up making an outfeed bench. price points they are all similar, I am just not sure what would be the best for this type of work. thanks for any input.

box size dwe7491rs


There are a couple of other options, as well. There are hybrid table saws, which fall solidly between a cabinet saw and a job site saw. For crafters, it might be worth it to look into a mini saw, which measures only a few inches and has moving parts. These saws are mostly used for model building, but they can also be put to use in woodworking projects.
Balancing heavy-duty durability and lightweight design, this machine proves that good things can come in small packages. While buyers are overall happy with their purchases, they do seem to all agree on one thing: the DEWALT DWE7480 may be an overall investment, but it could seriously do with a miter gauge replacement. Buyers report replacing its inaccurate, plastic gauge for a solid, more detailed one.

dewalt dwe7491rs against bosch 4100-09


The same goes for the kind of work you expect to do. Although a table saw is a pretty serious investment, you can trim money off your purchase if you don’t need something that will go through ash like a katana through a zombie. If you need the power or anticipate needing it in the future, you’ll want to invest extra to get it. So, be honest about what you’re going to need and tailor your major purchase to meet those needs.

The earliest examples of woodworking date all the way back to Ancient Egypt. According to cave drawings, wood was being used to build beds, chairs, stools and chests. During this time, Egyptians are also believed to have invented the art of gluing pieces of wood together – a practice that’s known as veneering today. But woodwork perhaps was made most famous in the Bible, where Noah’s efforts at building the ark over the course of 120 years were documented in detail. The directions issued in the Bible required Noah to create a water vessel 300 cubits long, 50 cubits wide and 30 cubits high, which would be 450 by 75 by 45 feet when converted to modern measurement methods.

dwe7491rs for sale


The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.
"The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less-robust stand, and after viewing it in a big box store, I was glad to have this one."—Justin Park, Product Tester

dwe7491rs for carpentry


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

blade guard dewalt dwe7491rs


The blade size of Dewalt 745 is around 10 inch which is good considering the fact that bigger size blades can have deep cuts and align the wood according to one’s needs. The circular saw blades are helpful in cutting and shaping the wood as required by the professionals/ Large wood materials can be cut with help of Dewalt 745 table saws. The blade can cut upto 3 ⅛ in at a 90 degree position and 2 ¼ in at a 45 degree position.

DEWALT DW7451 Compact Table Saw Holder

×