Kickback is another risk with a table saw. Some newer models come with kickback protection. But you can also protect against kickback by cutting and clamping a small block next to your rip fence, then make sure your rip fence is properly positioned away from the blade. The distance between the blade and rip fence should be the length of your cut plus your safety block.

I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.
Additional information for residents of Quebec only: The regular annual rate for persons applying for the Triangle Mastercard and the Triangle World Elite Mastercard is 22.99% for cash transactions and related fees and 19.99% for all other charges. Some applicants may receive a higher or lower regular annual rate depending on a credit evaluation. The minimum payment is the sum of (a) the greater of: (i) interest and fees shown on your statement + $10; or (ii) 5% of the New Balance, excluding amounts on special payment plans, (b) any balance over your credit limit, (c) any amounts past due not included in (b) above, and (d) the amount of any equal payments plan instalments then due. Balances under $10 are due in full. For residents of Quebec, the period between the statement date and the due date for payment is 26 days. The billing period covered by each statement can be from 28-33 days. The Triangle Mastercard and the Triangle World Elite Mastercard do not have an annual fee. Examples of borrowing costs (rounded to the nearest cent) assuming that all charges are purchases bearing interest at the regular annual rate of 19.99%, a 30 day month, no charges made on special payment plans and no other fees, additional payments or other changes are:
I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.
Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

height dwe7491rs


Our review of DeWalt table saws focused on two models that are very, very similar and one that harkens great advancements in the tool line that sadly has yet to fully come to fruition. The DWE7491RS and DW745 are very similar. The 7491 is slightly more powerful but also slightly heavier and both have miter gauges that should be replaced when purchasing the saws themselves. But the differences are slight enough that our choice of top pick comes down to the 7491’s larger rip capacity. That’s something that won’t affect a lot of people very often, so if your dollars are tight, you can go with a better for-dollar value with the DW745.


In layman’s terms, a miter gauge is a device that allows users to set up the angle of the material being cut with a table saw. And while most table saws come with built-in miter gauges, others, well, don’t—which is why the Kreg KMS7102 Table Saw Precision Miter Gauge System is invaluable. Whether you’re replacing an old, worn-out gauge or putting it to use in conjunction with a table saw that didn’t come with its own proprietary gauge, the KMS7102 is specially designed with precision in mind. After all, accuracy is vital to successful woodwork.
You can’t comparison shop for anything without looking at price at some point. Here’s where you can really apply some hard-nosed thinking. How much are you willing to pay for this feature, or that much rip capacity, or that much power? You might think that your budget requires that you buy the absolute rock-bottom least expensive saw on the market, but when you start comparing prices you might find that it doesn’t cost all that much to get a little more power or more peace of mind through a slightly better warranty. And, of course, prices change all the time. So if you don’t find what you want at the price you want today, it might be there tomorrow. Or, you can also look to refurbished models or other deals.

Best table saws 2020 - DeWalt, Bosch, SawStop & More


The first step always has to be to make sure that you match a saw with your actual needs. It’s a pretty simple thing to go out and buy the biggest, angriest saw available and call it good. But your genuine needs might be modest enough that the biggest, angriest saw is also too much saw, which means that you’re just throwing away a bunch of money. The same goes for weight. If you’re a small-framed person who has difficulty lugging around heavy, bulky objects, you’ll want to tailor your saw to your frame. If you can’t use it, it’s the same thing as not owning it.
On the other end of the handyman spectrum, you’ve got the seasoned professional with years of experience under his belt. We all know the type: he’s the guy that expects only the best, and DEWALT more than delivers with their patented DWE7491RS. This wood-slicing machine is the cream of the crop when it comes to cutting through even the toughest materials. The DWE7491RS measures 26.25 x 22 inches, so it’s a relatively large apparatus—you’re going to want to make sure that you have plenty of space in your garage for this table saw.

dwe7491rs against dwe7480

×